1x9 포고 핀 헤더 -2.54mm
(Through Hole Inline Pogo Pin Header
- 9 Pins with 0.1 inch Spacing)
개요
- 본 제품은 1x9 포고 핀 헤더 -2.54mm입니다.
- 스프링이 내장된 핀으로 JIG를 테스트하거나 납땜 없이 프로그래밍 하고자 할 경우 많이 사용하는 제품입니다.
특징
- Diagram
-
Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also if say you want to JTAG program a board that you can't solder headers to.
Most pogo's come as individual pins, that must be soldered into a jig to make contact. But maybe your board has 0.1" spacing already and you don't want to make a custom PCB? In that case you can use this Pogo Pin "Header" strip, with 9 pogos in a row with 2.54mm / 0.1" spacing. There's thin stems that could be soldered into a proto or perf board. The tops are rounded and individually springy
You could snap or cut these to make smaller bits but you may lose a pogo pin in between so keep that in mind.
Comes with a single in-line 9-pin pogo header.