32 x 8 매트릭스 LED 개발보드
-HT1632C
(32 x 8 Matrix LED board- HT1632C )
개요
- 본 제품은 HT1632C LED 디스플레이 드라이버를 이용한 32 x 8 크기의 LED 매트릭스 디스플레이입니다.
- 8x8 LED 매트릭스 4개를 연결하여 놓은 제품으로 1Mhz에서 동작하는 Atmega8L또한 장착하고 있습니다.
- AVR 10핀 ISP헤더가 있어 대부분의 AVR 프로그래머를 연결하여 프로그래밍이 가능하며, TX/RX 핀을 통해 데이터를 주고 받을 수 있습니다.
- PCB에는 트레이스와 솔더 패드가 있어 다른 부품을 설치할 수 있습니다.
- 알림: 공장에서 clock 데모 펌웨어가 심겨져 출고됩니다.
특징
- Power: 3V ~ 5V
- Minimum operating current: <30mA (5V, lowest brightness, lowest brightness can be used indoors)
- Maximum Operating Current: <300mA (5V, maximum brightness, glare)
- Dimensions: 6.85 in x 1.50 in x 0.59 in (17.4 cm x 3.8 cm x 1.5 cm)
- Weight: 2.86 oz (81 g)
- The power added MOS tube to prevent reverse
- Increase the polarity identification
- Driver chip add two tantalum capacitor filter and no working noise
- Download interface has changed IDC10 to IDC6, need to welding
- Reserved RTC has modified from DS1302 to DS3231 high precision clock chip
- An ATMega8L clocked at 1MHz, but able to be clocked to 2MHz, 4MHz, or 8MHz
- An external crystal of 32.768KHz intended for timekeeping, wired to TOSC1 (PB6) and TOSC2 (PB7)
- 4 8×8 LED-arrays with red LEDs. Apparently it also houses green LEDS, but those have not been wired. You could, however, reuse these panels in a different project and use green too.
- A HT1632C-chip to drive those LED arrays.
- An AVR 10-pin ISP header that’ll plug right into most AVR-programmers, and features the TX and RX pins brought out to two of the ground pins.
문서
연관제품
- 연관제품 1