BME680 I2C 센서 모듈 -온도, 습도, 대기압, VOC 가스
(SparkFun Environmental Sensor Breakout - BME680 (Qwiic))
개요
- 본 제품은 BME680 센서 모듈입니다.
- 작은 센서안에 온도, 습도, 대기압, VOC 가스 센싱을 할 수 있는 기능을 담았으며, I2C로 통신하여 데이터를 받을 수 있습니다.
- 습도를 ±3% 정확도, 대기압을 ±1 hPa 정확도, 온도를 ±1.0°C 정확도로 측정할 수 있습니다.
- 압력은 고도에 따라 변하기 때문에 1미터 오차를 가진 고도계로 사용할 수 있습니다.
- 또한 VOC 가스(에탄올, 알콜, 일산화탄소)와 같은 가스의 검출 또한 가능합니다.
- 가스종류를 구별하지는 못하며, 다른 VOC 센서와 마찬가지로 정교한 측정을 위해서는 보정이 필요할 수 있습니다.
- 처음 사용시에는 48시간의 burning time이 필요하며, 사용전에는 30분간의 예열시간을 권장합니다.
- 3.3V 시스템과 사용이 가능합니다.
특징
- Uses I2C interface (Qwiic-enabled)
- I2C Addresses: 0x77 (Default) or 0x76
- 2x Qwiic Connectors
- Operating voltage range
- 1.71V - 3.6V
- Typically 3.3V if using the Qwiic cable
- Relative humidity
- Operating range: 0% to 100%
- Absolute Accuracy: ±3%RH
- Resolution: ±0.008%RH
- Temperature
- Operating range: -40°C to +85 °C
- Absolute Accuracy: ±0.5°C to ±1.0°C
- Resolution: 0.01°C
- Pressure
- Operating range: 300hPa - 1100hPa
- Relative accuracy: ±12Pa (25°C to 40°C @ constant RH)
- Absolute accuracy: ±60Pa (0°C to 65°C)
- Resolution: 0.18PA, highest oversampling
- Gas
- Resolution of gas sensor resistance: 0.05% to 0.11%
- Typical current consumption (varies based on mode and active sensor)
- 2.1µA to 18mA
- 0.15 µA (sleep mode)
- Note: Getting actual indoor air quality (IAQ) from the BME680 can be difficult. If you would like to use the BME680 for precise IAQ measurements, we recommend using Bosch's BSEC Software. If you need a more direct sensor we recommend the SparkFun Environmental Sensor Combo which uses the CCS811 alongside the BME280.