DAQ 모듈 및 센서 키트 -교육용
(Gravity: Science Data Acquisition Module Kit for Experiments Education)
개요
- 본 제품은 DAQ 모듈 및 센서 키트 -교육용입니다.
- 센서의 데이터를 수집할 수 있는 SCI DAQ 모듈과 같이 연결하여 사용할 수 있는 센서들이 포함되어 있는 제품입니다.
- 교육용으로 빠르게 디지털 과학 실험을 진행하여 보고자 할때 사용이 가능한 제품입니다.
특징
- No programming required
- No need for scientific data conversion
- No prerequisite knowledge of hardware electronics
- Plug-and-play functionality for easy data reading and analysis
-
Gravity: Science Data Acquisition (SCI DAQ) Module
- Operating Voltage: 3.3-5.5V DC
- Operating Current: 40mA
- Output Signal: I2C (0x21-0x23)
- Input Interface: 1 x Digital/Analog, 2 x I2C/UART
- Onboard Storage: 16M
- RTC Battery: CR1220
- Screen Info: 1.3 inches OLED
- Product Dimension: 62×52×13mm/2.44×2.05×0.51"
Gravity: Analog Soil Moisture Sensor for Arduino
- Power supply: 3.3v or 5v
- Output voltage signal: 0~4.2v
- Current: 35mA
- Pin definition:
Analog output(Blue wire)
GND(Black wire)
Power(Red wire) - Size: 60x20x5mm(2.36x0.79x0.2")
- Surface finish:Immersion Gold
Gravity: I2C VEML7700 Ambient Light Sensor (0~120Klx)
- Supply Voltage: 3.3-5V
- Working Current: 45uA
- Shutdown Mode: 0.5uA
- Measuring Range: 0-120klx
- Accuracy: 0.0036 lx / ct
- Working Temperature: -25 ℃ ~ +85 ℃
- Dimension: 30 × 22 (mm) /1.81 x0.866 (inches)
- Weight: 12g
Gravity: SHT31-F Digital Temperature and Humidity Sensor
- Operating Voltage: 3.3~5.5V
- Operating Current: <1.5mA
- Humidity Detection Range: 0%RH~100%RH
- Humidity Accuracy: ±2%RH@10%RH~90%RH(at 25℃)
- Temperature Detection Range: -40℃~125℃
- Temperature Accuracy: ±0.2℃@0℃~90℃ (Typical)
- Communication: I2C
- Outline Dimension: 32x22mm/1.26x0.87"
- Mounting Hole Size: 3mm/0.12"
- Mounting Hole Pitch: 15mm/0.59"
Gravity: ENS160 Air Quality Sensor
- Power Supply Voltage: 3.3 V~5.5 V
- Working Current: 29 mA
- Interface Mode: I2C
- I2C Address: 0x52, 0x53
- Operating Temperature Range: -40℃~85℃
- Working Humidity Range: 5 %RH~95 %RH
- eCO2 Measurement Range: 400 ppm~65000ppm
- TVOC Measuring Range: 0ppb~65000ppb
- Product Size: 30x22 mm/1.18x0.87 inch
3×AA Battery Holder(PH2.0-2P)
- 3xAA Batteries
- Connect batteries in series
- PH2.0-2P interface
- Length of Wire: 15cm/5.91"
Type-C & Micro 2-in-1 USB Cable
- Type: Type-C&Micro
- Wire length: 1m
- Operating Voltage: 5V
- Peak Current: 2A
- Data transmission: support
Gravity-4P I2C/UART Sensor Cable
- Withstand Voltage: 50V
- Withstand Current: 1000mA
- Length: 30cm
- I2C/UART Pin Order: Red --- VCC
- Black --- GND
- Blue --- SCL/RX
- Green --- SDA/TX
-
SHIPPING LIST
- Gravity: Science Data Acquisition (SCI DAQ) Module x1
- Gravity: Analog Soil Moisture Sensor for Arduino x1
- Gravity: I2C VEML7700 Ambient Light Sensor (0~120Klx) x1
- Gravity: SHT31-F Digital Temperature and Humidity Sensor x1
- Gravity: ENS160 Air Quality Sensor x1
- 3×AA Battery Holder(PH2.0-2P) x1
- Type-C&Micro 2-in-1 USB Cable x1
- RTC Battery CR1220 x1
- Double-headed PH2.0-4P Cable 20cm x4
- Double-headed PH2.0-3P Cable 20cm x2
- Gravity-4P I2C/UART Sensor Cable x1
- Packing Box x1
-
The Science Experiments Data Acquisition Module Kit is a versatile toolkit for conducting rapid digital scientific exploration experiments. Whether you are a STEM educator or a curious student interested in scientific exploration, you can utilize this toolkit to delve into various aspects of the surrounding environment, such as plant growth conditions and temperature and humidity data in smart homes.