LoRA 라디오 피더윙 -RFM95W 900Mhz
(Adafruit LoRa Radio FeatherWing - RFM95W 900 MHz)
개요
- 본 제품은 RFM95W 을 탑재한 900Mhz LoRa 라디오 모듈입니다.
- Adafruit Feather 보드 시리즈와 결합하여 쉽게 사용할 수 있게 디자인된 제품입니다.
- 이 제품은 868Mhz 혹은 915Mhz 송수신에 사용이 가능하며, 정확한 라디오 주파수는 동적으로 튜닝이 가능하기 때문에 소프트웨어가 로드될때 결정되게 됩니다.
- +20dbm LoRa packet 라디오 모듈로 RFM69 시리즈와 호환되지는 않지만 더 멀리 통신할 수 있습니다.
- 간단한 와이어 안테나로 2Km로 통신이 가능하며, 지향성 안테나로 설정을 잘하여 준다면 20Km까지 통신이 가능합니다.
특징
- SX127x LoRa® based module with SPI interface
- Packet radio with ready-to-go Arduino libraries
- Uses the license-free ISM bands
- +5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)
- ~300uA during full sleep, ~120mA peak during +20dBm transmit, ~40mA during active radio listening.
- Our initial tests with default library settings: over 1.2mi/2Km line-of-sight with wire quarter-wave antennas. (With setting tweaking and directional antennas, 20Km is possible).
- Product Dimensions: 51.0mm x 22.8mm x 3.7mm / 2.0" x 0.9" x 0.1"
- Product Weight: 4.6g / 0.2oz
- Currently tested to work with the Feather ESP8266, Teensy 3 Feather, Feather 32u4 and Feather M0 series, some wiring is required to configure the FeatherWing for the chipset you plan to use.
All radios are sold individually and can only talk to radios of the same part number. E.g. RFM69 900 MHz can only talk to RFM69 900 MHz, LoRa 433 MHz can only talk to LoRa 433, etc.
Each radio 'Wing comes with some header. Some soldering is required to attach the header. You will need to cut and solder on a small piece of wire (any solid or stranded core is fine) in order to create your antenna. Optionally you can pick up a uFL or SMA edge-mount connector and attach an external duck.
문서
연관제품
- 연관제품 1