스테레오 3.7W Class D
오디오 앰프 -MAX98306
(Stereo 3.7W Class D Audio Amplifier
- MAX98306)
개요
- 본 제품은 작지만 놀라울 정도로 강력한 스테레오 앰프입니다.
- 2 x 3.7W 채널을 3오옴 임피던스 스피커에 전달할 수 있습니다.
- 2.7V-5.5VDC에서 동작이 가능하며 class D 컨트롤러로 믿을 수 없을 정도로 효율적입니다. (1W에서 8오옴 스피커 동작시 90% 효율) 이러한 특성은 배터리도 동작하는 프로젝트에 사용하기 매우 적합하게 만들어 줍니다.
- 내장된 과열, 과전류 보호기능이 있습니다. LM386 앰프를 업그레이드하기 좋은 제품입니다.
- 앰프의 입력은 1.0uF 캐패시터를 통해 들어가며, fully differential합니다. differential 출력을 사용하지 않을 경우 R-, L-을 그라운드로 묶으십시오.
- 출력은 Bridge Tied(means they connect directly to the outputs, no connection to ground)입니다.
- 출력은 ~360khz squre wave PWM이며 이후 스피커 코일에 의해 평균되어 출력됩니다. (높은 주파수는 들리지 않습니다)
- 모든 위의 설명이 의미하는 바는 본 제품의 출력을 다른 앰프에 연결할 수 없으며 스피커를 직접 동작시켜야되는 것을 의미합니다.
- 1.0uF 입력 캐패시터를 포함하여 본 제품은 조립되고 테스트되어 출고됩니다.
- 3.5mm 스크류 터미널 블럭이 있어 스피커를 쉽게 연결할 수 있습니다.
- 스피커는 포함되어 있지 않습니다. 4오옴이나 8오옴 임피던스의 스피커를 사용하십시오.
특징
- Output Power: 3.7W at 3Ω, 10% THD, 1.7W at 8Ω, 10% THD, with 5V Supply
- Passes EMI limit unfiltered with up to 12 inches (30 cm) of speaker cable
- High 83dB PSRR at 217Hz
- Spread-Spectrum Modulation and Active Emissions Limiting
- Five pin-selectable gains: 6dB, 9dB, 12dB, 15dB and 18dB. Select with a jumper or by setting the G and G' breakout pins (see schematic for breakout board showing gain pin settings for details)
- Excellent click-and-pop suppression
- Thermal and short-circuit/over-current protection
- Low current draw: 2mA quiescent and 10uA in shutdown mode
- Length:28.25mm/1.11in
- Width:24.15mm/0.95in
- Height:3.03mm/0.12in
- Weight:2.33g