3.3V 레귤레이터 모듈 -Step-Up/Step-Down
(3.3V Regulator Module -Step-Up/Step-Down)
개요
- 본 제품은 3.3V 레귤레이터 모듈입니다.
- 1.8V-5V 사이의 전원을 입력 받아 입력전원 상관없이 고정된 3.3V 전압을 출력합니다.
- 최대 100mA의 전류(피크시 150mA)를 연속적으로 공급할 수 있습니다.
- 작은 사이즈로 브레드보드에 꼽아 사용하기 좋게 디자인 되었습니다.
- 알림: 등급 이상의 입력 전압이나 부하에 연결하지 마십시오.
- 알림: 입력 전력은 출력 전력보다 높아야 합니다.
특징
- Low Noise, Regulated Charge Pump DC⁄DC Converter
- 2 in 1 DC-DC Step-Down & Step-Up Converter module
- Fixed 3.3V+-4% Output
- Voltage Input Range: 1.8~5V ( You can use two of this module to use the 1.2V NiMH batteries).
- Long time maximum output current 100mA
- Short time maximum output current 150mA
- working frequency 1.2MHz.
- Short-Circuit Protection
- No load input current : 0.65mA
- 2.54mm pin pitch, for Arduino Breadboard MCU Development Board friendly
- Excluding Pin Size 11mm x 7.62mm x 4.5mm(small)
- Weight : about 0.5g
문서
- n/a