라즈베리 파이용 16x2 RGB 문자 LCD
(Raspberry Pi RGB1602 LCD Module)
개요
- 본 제품은 라즈베리 파이용 16x2 RGB 문자 LCD 입니다.
- R/G/B 백라이트를 가지고 있어 상황에 따라 컬러를 선택할 수 있으며, 3개의 독립적인 dimming 핀이 있습니다.
- HD44780 타입의 LCD 컨트롤러를 탑재하고 있으며, I2C 인터페이스로 MCU와 통신합니다.
특징
- It's a LCD display which can show two lines and 16 characters on it. and it easy to use a blue and white 16x2 Character LCD.
- It's based on I2c protocol and it can communicate with your Pi with less wire.
- With this in mind, we wanted to make it easier for people to get these LCD into their projects so we devised a Pi plate that lets you control a 16x2 Character LCD,
- up to 3 led pins(RGB backlight) AND 5 keypad pins with pull-up resister using only the two I2C pins on the R-Pi!
- The best part is you don't really lose those two pins either, since you can stick i2c-based sensors, RTCs, etc and have them share the I2C bus.
- This is a super slick way to add a display without all the wiring hassle. This pi plate is perfect for when you want to build a stand-alone project with its own user interface.
- The 4 directional buttons plus select button allows basic control without having to attach a bulky computer.
- The plate is designed for both Revision 1 and Revision 2 Raspberry Pi's. It uses the I2C (SDA/SCL) pins, RGB backlight is controlled by Raspberry Pi GPIO pin and you can make it as breath light with softPWM.
- To keep them from shorting against the metal, a piece of electrical tape must be placed onto the USB ports
- Display construction: 16 Characters * 2 Lines
- Dimensions: 5.74cm × 8.24cm
- Comes with a 16x2 Blue & White LCD
- Plug and play with any Raspberry Pi
- Uses only the I2C (SDA/SCL) pins
- This board/chip uses I2C 7-bit address 0x20
- RBG backlight
- Pluggable LCD1602 module