Parallax 표준 서보 모터
(Parallax Standard Servo)
개요
- 본 제품은 Parallax사의 표준 서보 모터입니다.
- 로봇 프로젝트에 적합한 서보로 180도 회전이 가능하며, 마이크로컨트롤러로 쉽게 제어가 가능합니다.
- 6V에서 38 oz-in의 토크를 가지고 있습니다.
- 알림: 서보 동작시에는 충분한 전류를 공급하여 주십시오.
특징
- Holds any position between 0 and 180 degrees
- 38 oz-in torque at 6 V
- Accepts four mounting screws
- High precision gear made of the POM (polyacetal) resin makes for smooth operation with no backlash
- Weighs only 1.55 oz (44 g)
- Power Requirements: 4 to 6 VDC*,
- Communication: Pulse-width modulation
- Dimensions: 2.2 x 0.8 x 1.6 in (55.8x 19 x 40.6 mm) excluding servo horn
- Operating temp range: +14 to +144 °F (-10 to +50 °C)
- Torque: 38 oz-in @ 6 V
- Note: Servo current draw can spike while under load. Be sure that your application's power supply and voltage regulator is prepared to supply adequate current for all servos used. Do not try to power this servo directly from a BASIC Stamp module's Vdd or Vin pins; do not connect the servo's Vss line directly to the BASIC Stamp module's Vss pin.
문서
-
Propeller Spin Code to Center Servo - 843 bytes | updated: 26 Sep 2012 - 11:43 amStandard Servo BASIC Stamp Code - 2.82 KB | updated: 20 Sep 2012 - 2:52 pmServo Dimensions - 75.19 KB | updated: 20 Sep 2012 - 2:50 pmStandard Servo Product Documentation - 147 KB | updated: 20 Sep 2012 - 2:49 pm
- Standard Servo - Propeller C Tutorial (Learn.Parallax)
- Standard Servo KickStart - PBASIC, Arduino, and Propeller Spin examples
연관제품
- 연관제품 1