Pimoroni 라즈베리 파이용 1x8 RGB LED 매트릭스
(Blinkt! - eight APA102 pixels)
개요
- 본 제품은 1x8개의 RGB LED 매트릭스가 장착된 제품으로 라즈베리 파이 제로나 2x20 커넥터를 가진 라즈베리에 장착하여 사용할 수 있는 제품입니다.
- 라즈베리 파이에서 각각의 픽셀을 제어 및 디밍 할 수 있어 LED 아트나, 무드 조명 등의 프로젝트에 사용할 수 있습니다.
특징
- Eight APA102 RGB LEDs
- Individually controllable pixels
- Sits directly on top of your Pi in a tiny footprint
- Fits inside most Pi cases
- Doesn't interfere with PWM audio
- Blinkt! pinout
- Compatible with Raspberry Pi 3, 2, B+, A+, Zero, and Zero W
- Python library
- Comes fully assembled
문서
-
Our Blinkt! Python library will have you blasting out rainbows in two shakes of a unicorn's tail! There's a stack of examples too, from binary clocks to cheerlights and flickering candles to Larson scanners!
Our software does not support Raspbian Wheezy.
Notes
- Be careful to plug in your Blinkt! the correct way round, it has curves on the top that match the corners of your Raspberry Pi
- If you want to access the rest of the GPIO at the same time as using Blinkt! then our Mini Black HAT Hack3r is the ideal accompaniment, allowing you to combine Blinkt! with another HAT or pHAT, or just prototype using the GPIO pins for your own project
- The dimensions of Blinkt! are 65mm long x 8mm wide x 8.5mm thick (thickness includes header and pixels)
- Additional accessories shown in photos not included
We featured Blinkt! on a special episode of Bilge Tank where we tried to come up with as many different code examples as possible in one morning. Check it out below.