Onion Omega2 메이커 키트 -IOT 실험 키트
(Omega2+ Maker Kit)
개요
- 본 제품은 IoT 개발 키트 Omega2+ 메이커 키트입니다.
- Omega 보드와 포함돤 확장보드 및 부품을 이용하여 서보, DC 모터를 제어하고 OLED에 글자와 이미지를 디스플레이하고, 릴레이를 제어하는 실험(특징의 example참고) 등을 하여 볼 수 있습니다.
특징
- example
- Blinking an LED — Learn the basics of programming the Omega by turning an LED on and off.
- Blinking Multiple LEDs — Learn some more programming concepts by controlling multiple LEDs at once.
- Fading an LED — Create a cool LED fading effect using the Pulse Width Modulation (PWM) technique.
- Reading a Switch — Use a physical switch to control an LED through the Omega.
- Using a Shift Register — Use a shift register chip to control eight LEDs using only a few GPIOs.
- Controlling a 7-Segment Display — Add a 7-segment display to the previous circuit to display numbers.
- Reading a 1-Wire Temperature Sensor — Use a 1-wire temperature sensor to read the ambient temperature.
- Controlling an LCD Screen — Use the I2C protocol to control an LCD screen attached to the previous circuit.
- Dimming LEDs — Learn about Pulse Width Modulation and controlling LEDs.
- Controlling Servos — Use the PWM Expansion to control servos and pick up some Python skills along the way.
- Run a DC Motor With an H-Bridge — Get really creative and use the PWM Expansion to control an H-Bridge chip, which will in turn drive a DC motor.
- Writing Text to the Screen — We'll use Python to programmatically write text to the screen.
- Changing the Screen's Settings — Learn how to use user input to change display settings.
- Draw Lines — Prompt the user for input and use it to draw lines on the screen.
- Controlling Isolated Circuits — Learn how to control circuits electrically isolated from the Omega's circuits.
- include
- 1x Onion Omega2+ IoT Computer
- 1x Expansion Dock for Onion Omega
- 1x OLED Expansion Board for Onion Omega
- 1x Servo Expansion Board for Onion Omega
- 1x Relay Expansion Board for Onion Omega
- 1x Breadboard
- 1x Futaba Standard-Sized Servo
- 1x Generic Sub-Micro-Sized Servo
- 1x DC Hobby Motor
- 1x 7-Segment Display (Red LED)
- 1x LCD Screen (16x2)
- 1x Shift Register (74HC595)
- 1x H-Bridge Controller (SN754410)
- 1x Digital Temperature Sensor
- 1x Buzzer
- 5x Slide Switch
- 12x Tactile Push Button
- 1x Wall Charger
- 1x Braided USB Micro-B Cable
- 20x Multicolor LEDs
- 5x 100nF Ceramic Capacitor
- 20x 200Ω Resistor
- 10x 1kΩ Resistor
- 5x 100Ω Resistor
- 5x 470Ω Resistor
- 5x 5.1kΩ Resistor
- 5x 51kΩ Resistor
- 20x Jumper Wire (M/M)
- 20x Jumper Wire (M/F)