PWM DC 모터 스피드 컨트롤러 -6V-90V, 10A (피크 15A)
(PWM DC Motor Speed Controller -6V-90V, 15A)
개요
- 본 제품은 PWM DC 모터 속도 컨트롤러 입니다.
- 10A 등급(Peak 15A)까지 모터를 사용이 가능하며, 포텐셔미터를 이용하여 속도 조절이 가능합니다.
- 보드에는 20A 퓨즈가 장착되어 있어 전원을 반대로 연결하거나 과전압시 보호합니다.
특징
- Input supply voltage: DC 6V ~ 90V
The maximum output power: 1000W
The maximum continuous output current: 10A
The overload and short circuit protecting current is 15A
PWM frequency: 16KHz
Duty Cycle adjustable: 0% ~ 100%
The operation environment temperature: -20°C ~ 40°C
The 20A fuse with reverse connection of power supply and control voltage over-voltage protection function
Can adjust the speed by the external 0V ~ 5V signal
Size: 64 x 59 x 28mm - Note:
This can NOT be used to the BRUSHLESS motor.
The use of 0V ~ 5V external voltage control line description:
The speed regulator supports the use of an external DC voltage control. Using the following steps:
--First, remove potentiometer. (you may take it down from one side of the circuit board or potentiometer side down under your need);
--Second, connecting 0V ~ 5V DC control signal to the middle pin marking 0V ~ 5V;
--Third, connecting the earth wire of 0V ~ 5V DC control signal to the connecting piece on the pin marking GND;
문서
- n/a