Qwiic I2C MP3 트리거 플레이어 모듈
(SparkFun Qwiic MP3 Trigger)
개요
- 본 제품은 I2C MP3 플레이어 모듈입니다.
- I2C 인터페이스를 통해 전송한 명령으로 SD카드에 저장된 음악을 재생할 수 있는 제품입니다.
- USB-C 케이블을 이용하여 PC에 연결하면 microSD 카드의 내용물이 드라이브 형태로 나타납니다.
- MP3파일을 별도의 드라이버 없이 쉽게 전송할 수 있습니다.
- 음악 출력은 3.5mm 헤드폰 잭이나 poke-home 커넥터를 통해 연결된 외부 스피커로 내보낼 수 있습니다.
- 외장 스피커는 모듈의 Class-D 모노 오디오 앰프에 의해서 최대 1.4W까지 출력할 수 있습니다.
- 볼륨은 소프트웨어로 선택가능한 32레벨이 있으며, 이퀄라이제이션 튜닝이 가능합니다.
- 프로그래밍을 하지 않는다면 4개의 트리거 핀이 있어서 각 핀을 이용하여 모듈을 제어할 수 있습니다.
- 예를 들어 PIN3 번이 LOW 일시 T003.mp3이 플레이 되며, 여러개의 핀을 동시에 다운시켜 T001에서 T010까지 플레이를 할 수 있습니다.
- 볼륨, EQ, I2C 주소 등의 셋팅은 NVM에 저장되고, 전원을 켤시마다 로드됩니다.
- I2C 주소는 솔더 점퍼로 변경이 가능하며, 소프트웨어 명령을 이용하여 할당 하는 것도 가능합니다.
특징
- Operating voltage: 3.3V
- Current consumption:
- 40mA standy
- 40mA when playing over headphones at any volume level
- 150mA-300mA when driving external 8Ω speaker at full volume setting
- microSD supports 128MB to 32GB cards
- Volume, EQ setting, and I2C address settings stored in non-volatile memory and loaded at each power-on
- WT2003S MP3 decoder IC provides USB access to microSD socket (up to 32GB) and MP3 decoding
- ATtiny84 receives I2C commands and controls the MP3 decoder
- Poke-home connector allows for sturdy but temporary speaker connection without soldering
- Trigger pins 1, 2, 3, and 4. When pins 1+4 are pulled low simultaneously T005.mp3 will play
- Built-in TPA2005D1 based 1.4W Class-D mono amplifier
- Address jumper to select between I2C address 0x37 (default) and 0x38. I2C address is also configurable via software to one of 110 different addresses.
- USB-C Connector
- Qwiic Connector