블루투스 5.0 멀티포인트 오디오 리시버 모듈 (Apt-X)
(TSA6175 - Bluetooth 5.0 Multipoint Audio Receiver(Apt-X))
개요
- 본 제품은 블루투스 5.0 멀티포인트 오디오 리시버 모듈 (Apt-X) 입니다.
- 블루투스 장치에 여러 개를 페어링해 같이 동작할 수 있습니다.
특징
- Size: 44*38*11mm
- Multipoint connection
- Bluetooth 5.0
- Apt-X supported
-
Qualcomm cVc audio technology
-
Qualcomm TrueWireless Technology
- Stereo receive
- Effective transmission distance: 10-15m
- Mcro USB female port for powering the receiver from any USB power source(5VDC)
- Compatible with all Bluetooth devices that support media audio, including iPhone
문서
- How to change the BT name
-
If you have audio systems in different rooms. You can use multiple TSA6175 audio receiver board connect all of them together. When your smartphone connect to the master module and play music, all audio systems have audio out.
One board works like a normal receiver
Multiple boards work together
How to Use:
Master module:
- Power up the module, Blue LED slow blink.
- Double click S1 to set the module into Pairing mode. Blue LED fast blink. (Voice: Pairing)
- Now, Your smartphone will be able to find a new Bluetooth device which name is "CSR8675". Connect it.
- You can play the music now. If you only use one module as a normal receiver. You don't need do the following steps.
- Click S2, Set the module to transmitter mode.(Voice: transmitter mode)
Slave module:
- Power up the module. Blue LED slow blink.
- Make sure master module already working correct and in transmitter mode. Click S3 to set salve module into receiver mode. It will auto searching the master module. (Voice: receiver mode, searching)
- Double click the S2 on the Master module. The master module will auto searching(30s) slave module. Both master and slave module will be connected. (Voice: searching)
- The slave module will bave music out now.
- If there have new module want join as slave modue. Just click S3 on new module and Double click S2 on Master module.
- If a slave module want quit. Click S2 on that module.
Note: If you don't hear the voice prompt when click S2. Please click the S3 to switching the mode and then click S2 again.