LV8729 스텝모터 드라이버 -조용, 128 스텝핑, 1.5A
(LV8729 Stepper Motor Driver)
개요
- 본 제품은 조용하고 정교한 LV8729 스텝 모터 드라이버 모듈입니다.
- 1/128까지의 마이크로 스테핑이 가능한 제품으로 방열판이 포함되어 있습니다.
- 6-36V의 입력 전압을 가지고 있으며, 최대 처리가능한 전류는 1.5A입니다.
- 모듈상에 포텐셔미터가 장착되어 있어 모터 전류 제한 설정을 할 수 있습니다.
- 알림: 결선이 올바르지 않거나 스펙이상의 전류를 설정하면 칩이 손상되오니 주의를 요합니다.
특징
-
Model LV8729 Dimensions 1.5mm * 2.0mm (Same with the A4988 and DRV8825) Maximum Drive Current 1.5A (Default 0.8A) Operating Voltage 6V-36V, the proposed voltage is 12V Support Subdivisions 1, ½, ¼, ⅛, 1/16, 1/32, 1/64, 1/128
문서
-
Interface Resources
Wiring Diagram
Motor Current Setting
Current limits can be adjusted by measuring the VREF and the adjustable resistance (pls check wiring diagram). Connect the voltmeter + to VREF, [-] to the GND and read the value. LV8729 uses 0.10ohm current sense resistor, so the current limits can be calculated as follows: [Current Limit = VREF x 2]
Warning
Please do not exceed the current rating of the motor current, or motor and motor driver will be over-heated, or even damage.
Micro-stepping¶
Microstep MS1 MS2 MS3 Full Step Low Low Low ½ Step High Low Low ¼ Step Low High Low ⅛ Step High High Low 1/16 Step Low Low High 1/32 Step High Low High 1/64 Step Low High High 1/128 Step High High High