배터리 방전 방지 모듈 -12V~36V 배터리
(Battery Overdischarge-Safe Module -12 V- 36V Battery)
개요
- 본 제품은 배터리의 방전을 방지하는 배터리 방지 모듈입니다.
- 12V-36V 배터리와 사용이 가능하며, 방전되기 전에 자동으로 전원을 off 하는 기능을 가지고 있어 배터리 수명을 늘려줄 수 있는 제품입니다.
- 배터리 방전을 방지하여 수명을 늘려보십시오.
특징
- Input Voltage: DC 7~80V
- Control Accuracy: 0.1V
- Power Consumption: <1.5W
- Size: 57*42*19 mm (length*width*height)
- Weight: 28g
문서
- Wiring:
- VIN+: battery+
- VIN-: battery -
- VOUT+: positive of device/power supply system
- VOUT-: negative of device/power supply system
- Set and debug the module before connecting to the load. Watch the indicator light, on means there’s input, off means no input.
- Set Stop Voltage:
- Long press on “-” button for five seconds to stop voltage value flashing, then press “+/-” button to set stop voltage value.
- Start Control:
- Pressing the “+” button once, the indicator light will be on and input starts. Pressing the “+” button again, the indicator light will be off and input stops.
- Mandatory Input for five seconds:
- Long press on “+” button for three seconds to enter mandatory mode. Five seconds later it will automatically come to normal mode(stop voltage in normal mode is lower than battery voltage and protected lines will be automatically cut off after five seconds of mandatory input)
- When the new battery is initially used, the rated voltage is close to actual value. To determine stop voltage, user can use general voltage calculation method of battery to calculate reasonable discharge voltage value.
- When this module is used on the old battery, the actual voltage value and the rated voltage value differ greatly. User needs to measure stop voltage value in actual use.