Omzlo CANZERO CAN Bus IoT 아두이노 노드 -NoCAN 플랫폼
(CANZERO: The Powerful Arduino-compatible IOT Node )
개요
- NoCAN 플랫폼은 메이커를 위한 아두이노 호환 유선 IoT 플랫폼입니다.
- CAN-bus 통신을 기반으로 아두이노 호환 노드를 라즈베리 파이에 연결할 수 있게 하여 줍니다.
- CAN 통신을 사용하기 때문에 WiFi와 같은 무선 통신에 비해 신뢰성이 높으며, 유선으로 배터리와 같은 전원이슈에서 자유롭습니다.
- 라즈베리 파이는 NoCAN 네트워크를 제어하며 외부 네트워크간에 게이트웨이 역활을 합니다.
- NoCAN 네트워크에 센서, 조명, 릴레이, 액추에이터 등을 연결하여 복잡한 IoT 어플리케이션을 쉽게 구현할 수 있습니다.
- NoCAN 네트워크 구성을 위해서는 Olmzo PiMaster HAT을 장착한 라즈베리 파이와 Olmzo CANZERO가 필요합니다.
- 본 제품은 NoCAN 네트워크의 구성 노드로 사용되는 CANZERO 보드입니다.
- 각각의 CANZERO 보드는 독립적으로 프로그래밍이 가능하며, 다른 노드와 NoCAN 네트워크 안에서 통신이 가능합니다.
- 각 노드는 최대 300미터까지 연결이 가능하여 여러 센서와, 엑추에이터를 300미터 반경안에서 확장이 가능합니다.
- 아두이노 IDE를 이용하여 어플리케이션을 개발한 후 펌풰어를 네트워크 상의 CANZERO 보드에 직접 올릴 수 있습니다.
- CANZERO에는 SAMD21G18A ARM Cortex M0 MCU와 STM32F042 ARM Cortex M0+ MCU 두개의 MCU가 탑재되어 있습니다.
- CANZERO는 Arduino MKR Zero 와 동일한 모양을 가지고 있어 MKR용 쉴드는 CANZERO에서도 동작합니다.
- 알림: NoCAN 네트워크를 빌드하기 위해서는 PiMaster HAT과 라즈베리 파이가 필요합니다.
특징
-
The CANZERO board integrates the following components:
- The main MCU: a SAMD21G18A.
- The network driver MCU: an STM32F042.
- A step-down switching regulator providing 5V (500ma max) from the 6V to 28V DC wired input (MCP16301).
- An LDO taking 5V down to 3.3V (300ma max) for the MCUs and board logic levels (MIC5401-3.3).
- A CAN bus transceiver IC (MCP2562).
- Three LEDs:
- Red: power status.
- Green: network or bootloader status.
- Yellow: user-defined (Arduino).
- Two 14-pin 2.54mm headers: provides digital, analog and power connections, following the same pinout as the Arduino MKR Zero.
- Two 4-pin pluggable 3.5mm headers provide connection to the network and power (VIN, GND, CAN_L, CAN_H).
- A reverse polarity protection diode and various passives.
The CANbus network runs by default at 125Kbps
문서
- Soldering the headers is easy if you follow the instructions in our detailed installation tutorial.
- For more information about the CANZERO and NoCAN, including schematics and source code, check out our documentation and our detailed installation tutorial.