4G(LTE) 이동통신 아두이노 GPS 쉴드 -SIM7600CE
(4G(LTE)/3G/GSM Shield for Arduino with GPS - SIM7600CE)
개요
- 본 제품은 4G(LTE) 이동통신 아두이노 GPS 쉴드 -SIM7600CE 입니다.
- 이동통신과 GPS 모듈을 이용하여 넓은 범위의 위치 트래킹이 필요한 어플리케이션에 사용할 수 있는 제품입니다.
- 위치추적, 음성, 텍스트, SMS, 데이터를 전송할 수 있게 하여 줍니다.
- 장착된 SIM7600CE-T 4G LTE 모듈은 LTE-TDD/ LTE-FDD/HSPA+/TD-SCDMA/EVDO, GSM/GPRS/EDGE 및 LTE-CAT4(with uplink rate 50 Mbps and downlink rate 150 Mbps)을 지원합니다.
- 알림: 국내 통신사 사용여부는 사용하시고자 하시는 통신사에 문의 부탁 드리며, 이에 대한 기술지원은 하지 않습니다.
특징
-
4G/GPRS specifications:
- Dual-band 900MHz EGSM, 1800MHz DCS-connect onto any global GSM network with any 4G SIM.
- Make and receive voice calls using a headset with a microphone
- Send and receive SMS messages
- Send and receive GPRS data (TCP / IP, HTTP, etc.)
Data transfer Specifications- LTE CAT4: Uplink up to 50Mbps, Downlink up to 150Mbps
- TD-SCDMA: Uplink up to 128Kbps, Downlink up to 384Kbps
- TD-HSDPA / HSUPA: Uplink up to 2.2 Mbps, Downlink up to 2.8 Mbps
- HSPA +: Uplink up to 5.76 Mbps, Downlink up to 42 Mbps
- UMTS: Uplink / Downlink up to 384Kbps
- CDMA2000 / EVDO: Uplink up to 1.8 Mbps, Downlink up to 3.1 Mbps
- EDGE: Uplink / Downlink up to 236.8Kbps
- GPRS: Uplink / Downlink up to 85.6Kbps
GNSS Specifications- Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / -159 dBm (Beidou)
- Cold starts: -148 dBm
- Time-To-First-Fix (open air): Cold starts: <35s, Hot starts: <1s
- Positioning accuracy (open area): 2.5m (CEP50)
- Acceptance type: 16 -channels, C / A code
- GLONASS frequency band: 1597.5 ~ 1605.8MHz
- Beidou frequency band: 1559.05 ~ 1563.14MHz
- Update frequency: Default 1 Hz
- GNSS data format: NMEA-0183
SMS Specifications- Supported types: MT, MO, CB, Text, PDU
- Storage: USIM card and ME (default)
- Support domain: CS and PS
You may also need some required & recommended accessories to make this 4G shield work. These are not included!
- SIM Card. A 4G Mini SIM card is required to do anything on the cellular network.
- MicroUSB cable for charging the battery and communicating with the module over USB
- External GPS Antenna (needs a uFL to SMA adapter too)