Features:
High sensitivity suitable for low illumination applications
Low voltage suitable for embedded applications
Standard SCCB interface, compatible with I2C interface
RawRGB, RGB (GRB4:2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2) output formats
Support VGA, CIF, and various sizes from CIF to 40x30
VarioPixel sub-sampling method
Automatic influence control functions include: automatic exposure control, automatic gain control, automatic white balance, automatic elimination of light streaks, automatic black level calibration. Image quality control includes color saturation, hue, gamma, sharpness ANTI_BLOOM
ISP has the function of noise elimination and dead pixel compensation
Support image zoom
Lens loss compensation
50/60HZ automatic detection
Saturation automatic adjustment (UV adjustment)
Edge enhancement automatic adjustment
Noise reduction automatic adjustment
Lens Parameters:
Specification: 1/3’’
Interface: CS
Focal length: 12mm
Aperture: 1.6
Viewing angle: 25
Focus: Manual
Aperture: fixed
Pin Definition:
3V3--input power supply voltage (3.3V is recommended, 5V is also possible, but not recommended)
GDN--Ground
SIO_ C--Control clock of SCCB interface (note: some low-level MCUs need pull-up control, similar to I2C interface)
SIO _ D--The serial data input (output) end of the SCCB interface (note: some low-level microcontrollers require pull-up control, similar to I2C interface)
VSYNC--frame synchronization signal (output signal)
HREF-line synchronization signal (output signal)
PCLK--pixel clock (output signal)
D0-D7--data port (output signal)
RESTE--reset port (pull high for normal use)
PWDN--power consumption selection mode (normal use pull down)