TTGO T-OI PLUS RISC-V ESP32-C3 보드 -16340 배터리홀더
(TTGO T-OI PLUS RISC-V ESP32-C3 -16340 Battery Holder)
개요
- 본 제품은 TTGO T-OI PLUS RISC-V ESP32-C3 보드 -16340 배터리홀더 입니다.
- WiFi 및 블루투스 5.0을 지원하는 RISC-V MCU ESP32-C3 칩을 기반으로 디자인된 제품입니다.
- 16340 배터리 홀더가 장착되어 있어 배터리로 동작하는 어플리케이션에 사용이 가능합니다.
- 아두이노 IDE에서 개발이 가능합니다.
특징
- SoC – Espressif Systems ESP32-C3 single-core RISC-V processor @ 160 MHz with 2.4 GHz WiFi, Bluetooth 5.0 LE
- Storage – TBD flash (probably 2MB or 4MB)
- Antenna – Ceramic antenna and IPEX connector
- USB – USB-C port for power and programming
- Expansion
- 2x 8-pin headers with 12x GPIO, 1x SPI, 1x UART, 3x ADC, 5V, 3.3V, GND
- 4-pin I2C Grove connector
- Misc – Power and charging LEDs, Reset button, power switch
- Power Supply
- 5V via USB Type-C port
- Holder for 3.7V 16340 LiPo battery plus charging circuit
- Dimensions – 45.7 x 25.8 x 15.8 mm
문서
- https://github.com/Xinyuan-LilyGO/LilyGo-T-OI-PLUS
- https://github.com/Xinyuan-LilyGO/LilyGo-T-OI-PLUS#quick-start
- https://github.com/Xinyuan-LilyGO/LilyGo-T-OI-PLUS/tree/main/frimware
- https://github.com/Xinyuan-LilyGO/LilyGo-T-OI-PLUS/tree/main/schematic
-
How to coding
- Install the current upstream Arduino IDE at the 1.8 level or later. The current version is at the Arduino website.
- Start Arduino and open Preferences window. In additional board manager add url: https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json .separating them with commas.
- Select Tools -> Board -> ESP32C3 Dev Module
- If you do not have a driver installed, you need to install it (Window:ch341ser2.exe, MAC:ch34x_mac_driver_v1.6.zip)
Need to install the following dependencies
- Adafruit_NeoPixel
- Need to install the following dependenciesAdafruit_NeoPixelHow to coding