ESP32 S2 피코 RP2040 보드
(ESP32 S2 PICO RP2040 Board)
개요
- 본 제품은 ESP32 S2 피코 RP2040 보드 입니다.
- ESP32-S 칩과 RP2040 마이크로 컨트롤러를 탑재하고 있는 보드입니다.
- WiFi 를 지원하며 CircuitPython, MicroPython, C/C++(Arduino, ESP-IDF) 의 개발환경을 지원합니다.
- USB-C 커넥터를 장착하고 있습니다.
특징
- Support Raspberry Pi Pico expansion board ecosystem to satisfy creative IoT application development.
- Xtensa single-core 32-bit LX7 microprocessor, ESP32-S2FH4, supports clock frequency up to 240 MHz.
- Integrated 320KB SRAM, 128KB ROM, 8MB PSRAM, 4MB Flash memory.
- Support IEEE802.11 b/g/n, on-board 2.4 GHz WiFi ceramic antenna, up to 150 Mbps data transfer rate.
- USB-C connector, no more plug orientation problem.
- On-chip integrated full-speed USB OTG interface, LCD interface (8-bit serial RGB/8080/6800), TWAI controller (ISO11898-1 compatible), capacitive sensor GPIO, temperature sensor, and RMT (TX/RX).
- On-board 1.8A current high-efficiency boost/buck DC-DC TPS63000 power supply IC.
- Support a variety of low-power operating states for adjusting the optimal balance between communication distance, data rate, and power consumption, to meet the power requirements of various application scenarios.
- Castellated module allows soldering direct to user-designed carrier boards.