2x18650 배터리 5V/2A USB 출력 모듈
(2-Way 18650 Battery Holder)
개요
- 본 제품은 2x18650 배터리 5V/2A 출력 모듈 입니다.
- 18650배터리를 꼽아 5V/2A USB 출력을 얻을 수 있는 제품입니다.
- 5V USB 출력 외에 3.3V 출력 3개와 5V 출력 3개 포트를 지원합니다.
- micro USB 및 USB-C 커넥터를 통해 충전을 할 수 있습니다.
- 알림: 배터리 삽입시 극성에 주의 하십시오. 극성이 올바르지 않을 경우 파손의 위험이 있습니다.
특징
- Output current: 5V/2A, maximum support 3A; 3.3V/1A
- Protection: with overcharge and over-discharge protection
- Input: Micro and Type-C input
- Output: USB output*1, 3.3V output port*5, 5V output port*5
- LED indicator (blinking means charging, stop blinking means fully charged)
문서
-
This easy-to-use 16850 battery holder with dual-slot offers micro and type-C charging inputs, and it can be installed with two 18650 batteries, five 5V/2A output ports, five 3.3V/1A output ports, and one 5V USB output.
It comes with overcharge and over-discharge protections that greatly extend the lifespan of your 18650 battery. The onboard DIP switch allows users to switch between HOLD and NORMAL modes. In Normal mode, it auto shutdown when the current is too low, while in HOLD mode, it keeps outputting and does not shut down until the over-discharge protection is triggered.
This battery holder can be worked as the power source for microdevices, outdoor equipment, or DIY smart vehicles.
Board Overview
Notes
The maximum current is 3A (3A is not recommended), and the output of the current depends on the quality of the 18650 battery.
Pay attention to battery polarity when installing. The + and - are clearly marked on the board, and the wrong direction will burn the module.