전체상품목록 바로가기

본문 바로가기

오늘하루 열지않기

전체상품목록 바로가기

본문 바로가기


 
이전 제품 보기 다음 제품 보기
추천메일 보내기 상품조르기 대량구매문의

오픈로그 데이터로거/BME280 센서 및 JEDI One 소프트웨어 키트 (SparkFun OpenLog Data Collector with Machinechat - Environmental Monitoring) (해외배송 가능상품)

기본 정보
판매가(VAT별도) 261,520원
상품코드 P000BFBO
수량 수량증가수량감소
상품요약정보 오픈로그 데이터로거/BME280 센서 및 JEDI One 소프트웨어 키트 입니다.
색상 옵션
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
오픈로그 데이터로거/BME280 센서 및 JEDI One 소프트웨어 키트 (SparkFun OpenLog Data Collector with Machinechat - Environmental Monitoring) 수량증가 수량감소 (  )
총 상품금액(수량) : 0 (0개)
바로구매하기 장바구니 담기 SOLD OUT 관심상품등록

재고안내

  • 상품의 실시간 재고는 네이버 페이 버튼 옆 상담 톡톡 버튼 으로 문의 주시면 더 빠르게 답변이 가능합니다

  • 품목이 많으실 경우는 견적서 출력 후 견적서 출력하신 분의 성함을 알려주시면 빠른 답변이 가능합니다

 

회원가입안내

  • 1. 회원가입 후 무통장 결제시

    할인 쿠폰의 사용이 가능
  • 2. 문의 게시판을 통한 기술지원

  • 3. 신규회원 가입시 2,00원 적립

  • 4. 주문/배송 내역 SMS 발송

회원가입

이벤트

오픈로그 데이터로거/BME280 센서 및 JEDI One 소프트웨어 키트

(SparkFun OpenLog Data Collector with Machinechat - Environmental Monitoring)

IMG_0242

 

개요

  • 본 제품은 오픈로그 데이터로거/BME280 센서 및 JEDI One 소프트웨어 키트 입니다.
  • SparkFun OpenLog Artemis (without IMU)제품과 SparkFun Atmospheric Sensor Breakout - BME280 (Qwiic)및 JEDI One 소프트웨어가 포함되어 있는 키트 제품입니다.
  • Machinechat's JEDI One 소프트웨어는 쉽게 IoT 데이터를 수집하고 변형하고 비주얼화 하여 리포트할 수 있는 원스탑 대쉬보드 소프트웨어 솔루션입니다.
  • 오픈로그와 JEDI One 소프트웨어를 이용하여 데이터수집 프로젝트에 이용하여 보십시요.

특징

  • include
  • SparkFun OpenLog Artemis (without IMU):

    • Artemis Module (Cortex-M4F based Apollo3 microcontroller)
      • Configurable via CH340E and Artemis Firmware Upload GUI
    • Operating voltage range
      • 3.3V to 6.5V (via VIN with optional external power switch)
        • 5V with USB (via 5V or USB type C)
        • 3.6V to 4.2V with LiPo battery (via VBATT or 2-pin JST)
          • Built-in MCP73831 single cell LiPo charger
          • Minimum 450mA charge rate
        • 3.3V (via 3V3)
    • Current consumption
      • ~20mA (Run)
      • ~80µA (Sleep)
      • ~18µA (Deep Sleep - regulator shut down)
    • Ports
      • 1x USB type C
      • 1x LiPo battery enabled
      • 1x Qwiic enabled I2C with power control
      • 1x SWD 2x5 header
      • 4x Analog-to-digital
        • 14-bit, up to 1900Hz, 2V max (3.3V compatible)
      • Serial
        • Logging speeds up to 500000bps [1]
      • 1x microSD socket
        • Support for FAT32 and older FAT16 formats up to 32GB with power control
    • RTC with 1mAhr battery backup
    • LEDs
      • Power
      • LiPo charge indicator
      • Serial Tx and Rx
      • Status

    SparkFun Atmospheric Sensor Breakout - BME280 (Qwiic):

    • Operating Voltage: 1.71V-3.6V (Default on Qwiic System: 3.3V)
    • I2C & SPI Interface
    • Temperature Range:
      • Full Accuracy: 0°C-65°C (32°F-149°F)
      • Operational: -40°C-85°C (-40°F-185°F)
    • Humidity Range: 0-100% RH
    • Pressure Range: 300-1100 hPa (30,000-110,000 Pa or approx. 4.35-15.95 PSI)
    • I2C Address: 0x77 (Default) or 0x76

    Machinechat Requirements:

    • Intel x86 PC or server
    • Microsoft Windows 10
    • Apple Mac OS 10.13.6 and above
    • Ubuntu Linux 16.04 and above
    • Memory : 4GB or greater
    • Storage : 30MB min of disk space
  • The Environmental Monitoring version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data from an included BME280 Qwiic Atmospheric Sensor with the OpenLog Artemis and JEDI One. The SparkFun OpenLog Artemis (without IMU) is an open source data logger that comes preprogrammed to automatically log GPS / GNSS, serial data, and various pressure, humidity, and distance data as well as the ability to expand out to any number of our Qwiic sensors. This makes it ideal for data collection, and to display that data, Machinechat's JEDI One will be your best friend!

    Machinechat's JEDI One provides an easy-to-use, customizable, one stop dashboard solution for IoT data collection, transformation, visualization, and reporting. Built-in HTTP and TCP servers allow you to start collecting data from sensors and devices in minutes, and custom plug-ins allow you to collect data from virtually any sensor or device. In addition, a fully integrated and self-contained MQTT broker makes it easy to integrate any MQTT based device or sensor. No need to set up a separate broker or use Azure or AWS for MQTT. Just configure and go!

    The SparkFun BME280 Atmospheric Sensor Breakout is an easy way to measure barometric pressure, humidity, and temperature readings, all without taking up too much space. Basically, you can find out anything you need to know about atmospheric conditions from this tiny breakout. The BME280 Breakout has been designed to be used in indoor/outdoor navigation, weather forecasting, home automation, and even personal health and wellness monitoring.

    Simply connect the BME280 Breakout of another compatible Qwiic-enabled device, power up the OpenLog Artemis, and all incoming serial data is automatically recorded to a log file with baud rates up to 500000bps, supported! The OLA also has four ADC channels available on the edge of the board. Voltages up to 2V can be logged with 14-bit precision up to 1900Hz for one channel and 1000Hz logging all four channels. Additionally, based on feedback from users we've added an on-board RTC so that all data can be time stamped.

    The OpenLog Artemis is highly configurable over an easy to use serial interface. Simply plug in a USB-C cable and open a terminal at 115200bps. The logging output is automatically streamed to both the terminal and the microSD. Pressing any key will open the configuration menu.

    Included in this kit, you will find an OpenLog Artemis (without IMU), a BME280 Qwiic Atmospheric Sensor Breakout, a unique JEDI One license, and connector cables. Additional sensors must be purchased separately. If you are interested in picking up a different version of this kit, be sure to check out the Base Kit or Air Quality Monitoring Kit, instead!

    Note: The version of OpenLog Artemis included in this kit has the ICM-20948 IMU sensor removed. This IC is becoming increasingly difficult to locate. This version still supports auto-detection and logging of over a dozen sensors and GNSS receivers.

문서

연관제품

상품결제정보

결제는 신용카드, 실시간 계좌이체, 무통장 입금 등을 선택하여 진행하실 수 있습니다. 세금계산서 발행을 요청하실 경우에는 결제방법을 무통장 입금으로 선택하시고 사업자등록증 사본을 cs@vctec.co.kr으로 보내주셔야 합니다.

배송정보

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,500원
  • 배송 기간 : 1일 ~ 10일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하실 수 있습니다.
    - 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
    - 구매 총액이 10만원 미만의 주문 경우는 택배발송시에는 배송비 3,500원이 추가됩니다.
    - 구매 총액 10만원 미만 주문의 퀵발송 및 급행처리 요청시 핸들링 비용 3,500원이 추가 됩니다.
    - 매장이 아니므로 방문구매 및 수령이 불가능 합니다.
    - 영업일 기준 2일 이내 미출고 물품은 해외 수입 제품입니다.
    - 높은 전압과 전류를 사용하는 제품은 사용 전 안전에 유의 바랍니다.
    - 제품을 교육수준으로 설명하거나 사용자 프로젝트에 대한 컨설팅이나 기술지원을 하지 않사오니 참고부탁 드립니다.

교환 및 반품정보

교환 및 반품안내
- 상품을 공급 받으신 날로부터 7일이내에 교환 및 반품이 가능하며,
- 미개봉/미설치 제품인 경우이거나 불량제품인 경우에 한해 가능합니다.

- 교환/반품시 승인 없이 제품을 먼저 발송시 왕복 택배비가 발생합니다.
- 상품가치가 훼손되어 재판매가 불가능 할 경우는 교환/반품이  불가능합니다.
- 소프트웨어는 개봉시 교환/반품이 불가능합니다.

- 주문수입제품의 경우는 환불/교환이 불가능합니다.

- 수입제품의 경우는 수리가 불가능합니다.
- 배송지연안내를 받으신 경우는 주문 수입되는 경우이며, 주문 수입 제품의 경우 환불/교환이 불가능합니다.

- 고객변심에 의한 교환 및 반품 시 왕복 배송비는 고객님께서 부담하셔야 합니다.
- 제품구성품 및 스펙은 제조사 사정에 의해 예고없이 변경 될수도 있습니다.

서비스문의

기술문의는 상품Q&A 및 상단의 "제품문의" 게시판으로만 답변을 드리고 있사오니, 게시판에 문의 요청 드립니다.
견적서 출력 및 주문서작성 시에는 브라우저의 팝업창 해제를 취소하셔야 해당 창이 나타납니다.

제품리뷰

제품 리뷰를 적어주세요.

게시물이 없습니다

상품문의하기 모두 보기

상품 Q&A

상품에 대해 궁금한 점을 해결해 드립니다.

게시물이 없습니다

상품문의하기 모두 보기

 

이전 제품  
다음 제품