PICASO μVGA-II 그래픽 컨트롤러
(PICASO μVGA-III
- Graphics Controller)
개요
- μVGA-III 모듈은 PICASO 그래픽 프로세서가 장착된 작고 독립적(standalone)으로 사용가능한 VGA 그래픽 엔진입니다.
- 강력한 그래픽, 텍트스, 이미지, 애니매이션 기능 외에 모듈안에 내장된 수많은 기능의 QVGA/VGA/WVGA 그래픽 솔루션을 임베디드 시스템에 제공할 수 있습니다.
- μVGA-III은 리모트 VGA커넥터를 지원하여 PCB에서 분리 시킬 수 있어 설치 및 연결을 유연하게 할 수 있습니다.
- 30 way header가 PCB 뒷면에 제공되어, 추가적인 IO 등이 필요하다면 납땜하여 사용할 수 있습니다.
특징
-
Simple VGA interface to variety of monitors and LCD screens.
-
Supports the following resolutions:• 320 x 240 (QVGA)• 640 x 480 (VGA)• 800 x 480 (WVGA)
- 4.0V to 5.5V range operation
- Supports RGB 65K true to life colors
-
14KB of flash memory for user code storage and 14KB of SRAM for user variables, or 14KB shared user code and program variables.
-
2 x Asynchronous hardware serial UART ports (COM0, COM1), TTL interface, with 300 to 600K baud.
- On-board micro-SD memory card adaptor for multimedia storage and data logging purposes. HC memory card support is also available for cards larger than 4Gb.
- Easy 5 pin interface to any host device:
- VCC, TX, RX, GND, RESET. commands. - 2 x Asynchronous hardware serial port, TTL interface, with 300 baud to 256K baud.
-
DOS compatible file access (FAT16 format) as well as low level access to card memory
-
Dedicated Line-Level PWM Audio pin driven by WAV files from micro-SD card.
-
A 30 pin header for I/O expansion (supplied butnot soldered onto the PCB)
-
15 pin D-type standard VGA connector to interface to any external VGA monitor, on a remote and detachable cable.
- Dimensions: 39.0 x 63.0 x 21.5mm
- Weight: ~ 17g.
구성품
- μVGA-III Module
- 150mm 5 pin Female-Female jumper cable (with 5 pin Male-Male adapter to make the jumper cable into Male-Female)
- VGA Cable
- 2x15 pin SMT Connector
문서
연관제품
- 연관제품 1