와이어 LED -빨강색 12 LED, 코인셀 홀더
(Wire Light LED Strand
- 12 Red LEDs + Coin Cell Holder)
개요
- 본 제품은 은색 와이어에 빨강색 LED 12개와 코인셀 배터리 홀더가 포함된 제품입니다.
- 코팅된 두개의 와이어 사이 사이에 1000mcd의 밝기를 가진 LED가 에폭시로 장착되어 생활 방수가 가능하며
- 유연하게 구부러지면서 매우 밝게 빛이 나게 디자인되었습니다.
- 약 5센티미터의 간격으로 12개의 LED가 와이어에 장착되어 있습니다.
- 와이어 끝에는 CR2032 코인셀 배터리 2개를 장착할 수 있는 배터리 홀더가 있습니다.
- 동작을 위해서는 2개의 CR2032 배터리가 필요합니다.
특징
- LED strand is 26 inches (660mm) long, LEDs are spaced 5cm/2" apart
- 1000mcd brightness per LED, Forward voltage of 2.0-2.3V @ 20mA
- Connecting wire is 8 inches (203mm) long
- Battery holder is 2" x 0.9" x 0.22" (51mm x 23mm x 5.6mm)
- Weight without batteries: 6.44g
- Weight with batteries: 12.44g
- Please note: There are no series resistor installed in the strand, if you want to use another supply you will need to calculate and solder in a resistor. The reason that two 3V coin cells can be used to drive LEDs with a forward voltage of about 2.1V is that coin cells have an internal resistance that makes up for the lack of a choke resistor. If you want to drive these via a 6V power supply, you'll want to put in a 47-470 ohm (or larger) resistor in series to avoid burning out the LEDs. If you want to use a 4.5V power supply, use 20-220 ohms (or larger).