모노크롬 0.96인치 128x64 OLED 그래픽 디스플레이
(Monochrome 0.96" 128x64 OLED graphic display)
개요
- 본 제품은 0.96인치의 작은 OLED 디스플레이입니다.
- 128x64 해상도의 흰색 OLED 픽셀을 가지고 있으며, 각각의 픽셀은 컨트롤러에 의해 on/off 제어가 가능합니다.
- OLED는 자체적으로 발광하기 때문에 백라이트가 필요하지 않아 전력을 절약 할 수 있으며, 높은 contrast를 가집니다.
- 디스플레이 뒷면에 있는 납땜 점퍼를 이용하여 SPI 혹은 I2C 인터페이스를 선택할 수 있습니다.
- 모듈에 장착된 드라이버 칩은 SSD1306이며, OLED는 3.3V 전원 및 로직으로 동작하지만 모듈에 레벨쉬프터가 장착되어 있어 5V 장치에서도 사용이 가능합니다.
- 3.3V 전원에서 약 40mA가량을 소비합니다.
- 문서 섹션의 아두이노 라이브러리 및 예제 코드를 참고하십시오.
- 마이크로컨트롤러는 화면을 버퍼링하기 위해 1K 램 이상이 있어야 합니다.
특징
-
Dimensions:
- PCB: 38mm x 29mm (1.5" x 1")
- Screen: 25mm x 14mm
- Thickness: 4mm
- Weight: 8.5g
- Display current draw is completely dependent on your usage: each OLED LED draws current when on so the more pixels you have lit, the more current is used. They tend to draw ~20mA or so in practice but for precise numbers you must measure the current in your usage circuit.
- This board/chip uses I2C 7-bit address between 0x3C-0x3D, selectable with jumpers
문서
- Monochrome OLED Breakouts
- OLED TRON Clock
- Adafruit OLED Displays for Raspberry Pi
- SSD1306 OLED Displays with Raspberry Pi and BeagleBone Black
- Adafruit FT232H With SPI & I2C Devices
- We have a detailed tutorial and example code in the form of an Arduino library
- You can download our SSD1306 OLED display Arduino library from github
- UG-2864HSWEG01 Datasheet
- UG-2864HSWEG01 User Guide
- SSD1306 Datasheet
- Netduino driver, Netduino sample and documentation. This sample displays bitmaps and animations on the display.