1.27인치 OLED 모듈 -16비트 컬러, microSD
(OLED Breakout Board
- 16-bit Color 1.27" w/microSD holder)
개요
- 본 제품은 1.27인치 OLED 컬러 디스플레이로 16비트 컬러와 microSD 슬롯을 지원합니다.
- 128x96 RGB 펙셀과 매우 높은 contrast를 가지고 있으며, OLED 이기 때문에 백라이트는 없습니다.
- SSD1351 드라이버 칩을 사용하여 동작하며, SPI(clock, data, chip select, data/command, optional reset)을 사용하여 칩과 통신할 수 있습니다.
- 보드에는 OLED, OLED에 12V를 공급하기 위한 부스트 컨버터, microSD 홀더가 장착되어 있습니다.
- 또한 로직 레벨 쉬프터가 포함되어 있어 3-5VDC 전원 및 로직 레벨과 사용이 가능합니다.
-
특징
- 1.27" diagonal OLED, 16-bit color
- SPI interface
- 3.3-5V logic and power
- PCB Dimensions: 36mm x 43mm/1.4" x 1.7" / 2mm thick
- Screen Dimensions: 32mm x 27mm/1.27" x 1.07"
- Display current draw is completely dependent on your usage: each OLED LED draws current when on so the more pixels you have lit, the more current is used. They tend to draw ~30mA or so in practice but for precise numbers you must measure the current in your usage circuit. This does not include the SD card, which is separate
문서
- Adafruit 1.27" and 1.5" Color OLED Breakout Board
- SSD1351 Datasheet has details about the controller
- we've written a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code
- Check out the tutorial we have for both this and the 1.5" version of the OLED for wiring diagram, code, and more!