인덕티브 근접 센서 15mm
(Autonics PR30-15DN Inductive Proximity Sensor - 15mm)
개요
- 본 제품은 금속성 물체를 검출할 수 있는 인덕티브 근접 센서입니다.
- 15mm 이내에서 금속성 물체가 근접하였는지 터치 없이 탐지하여 스위치처럼 디지털 출력 신호를 내보냅니다.
- 센서가 전자기장을 생성하여 금속성 물체가 있는지 검출하는 제품입니다.
- 알림: 탐지 거리는 물체의 모양과 접근 속도 등에 따라 변화합니다.
특징
-
Product Specifications
Sensor Properties
Detecting Distance Max 15 mm Setting Distance Max 10.5 mm Sensor Type Proximity (Inductive) Sensor Output Switch Type Normally Open Detection Hysteresis Max 10 % Sensor Response Time Max 5 ms
Electrical Properties
Supply Voltage Min 12 V DC Supply Voltage Max 24 V DC Current Consumption Max 10 mA Protection Circuitry Reverse Polarity, Surge, Overload and Short-Circuit
Physical Properties
Cable Length 2 m Material ABS Resin / Metal Operating Indicator Red LED IP Rating IP67 Operating Temperature Min -25 °C Operating Temperature Max 70 °C Operating Humidity Min 35 %RH Operating Humidity Max 95 %RH -
Recommended Power Supplies
- 3084 – Power Supply 12VDC 0.5A (European style plug)
- 3085 – Power Supply 12VDC 0.5A - US (North American style plug)
- 3025 – Power Supply 12VDC 2.0A (UK style plug)
- 3022 – Power Supply 12VDC 2.0A (Australian style plug)
-
Comes packaged with
- Mounting Hardware Kit
-
Connection
This sensor connects to any device with a Digital Input.This is how you connect the 3527 to a Phidget board that does not have 12V power such as the 1018, 1012, 1202, and 1203 using our 12VDC Power Supply:
- Connect the +12 wire from the Power Supply (that's the one with the white line) to the 3527 Brown wire.
- Connect the 3527 Black wire to a Digital Input on the 1018.
- Connect the Power supply Ground Wire and the 3527 Blue wire to the Digital Input Ground connector on the 1018.
Note:When the 3527 is connected to a 1012, it will behave as a Normally Closed (NC) sensor instead of Normally Open (NO).
The 3527 can also be used with the 1144 - 12V Sensor Adapter if you want to connect to a device with an analog input without worrying about providing a 12V power supply.
For boards that have power input, if the supplied power is within 12-24VDC, the +V line can be connected to the terminal block, powering the sensor from the Phidget. The 1019, 1073, and 1063 all accept external power.
문서
-
Resources