광학 로터리 인코더 ISC3004
(Optical Rotary Encoder ISC3004)
개요
- 본 인코더는 3000RPM까지의 속도를 측정할 수 있는 인코더입니다.
- 작은 볼 베어링으로 구성되어 있는 인덱스 없는 로터리 인코더입니다.
- Phidgets Encoder Interface에 연결이 가능합니다.
- 1미터 케이블과 2개의 마운팅 스크류가 포함되어 있습니다.
- 모터의 샤프트나 다른 장치에 붙여서 사용할 수 있습니다. 아래의 샤프트 커플러를 추천합니다.
특징
-
Product Specifications
Encoder Properties
Output Circuit Type Push-Pull (Single-Ended) Encoder Resolution 360 CPR Encoder Speed Max 3000 RPM
Electrical Properties
Supply Voltage Min 5 V DC Supply Voltage Max 5 V DC Output Frequency Max 80 kHz
Physical Properties
Shaft Diameter 4 mm Shaft Maximum Axial Load 10 N Shaft Maximum Radial Load 20 N Operating Humidity Min 30 %RH Operating Humidity Max (Non-condensing) 85 %RH Operating Temperature Min -25 °C Operating Temperature Max 85 °C IP Rating IP54 Weight 83 g -
Connection
This rotary encoder connects to:
The easiest way to connect your encoder to the 1057 or to the 1047 is to use a 3019 - HighSpeed Encoder Cable 50cm, cut it to the desired length and solder the encoder wires to the encoder cable as follows:
3530 - Encoder 3019 - Phidget cable Red Red Black Black White White Green Brown
You could also buy the male connector, which is a Molex 50-57-9405, and crimp it onto the end of the cable, if you have the appropriate tools.