광학 로터리 인코더 HKT22
(Optical Rotary Encoder HKT22)
개요
- 본 제품은 광학 로터리 인코더로 스텝모터의 리어 샤프트에 연결하여 사용하도록 디자인된 제품입니다.
- 모터의 회전을 측정할 수 있게 디자인된 제품으로 컴팩트하고 경제적인 광학 quadrature encoder입니다.
- 모터의 4mm 리어 샤프트에 부착할 수 있으며, 회전당 300 카운트를 제공합니다.
- 모터의 리어 샤프트에 장착 후 설정-나사를 조여 줄 수 있습니다.
- 조립 가이드는 문서섹션의 사용자 매뉴얼을 참고 바랍니다.
- index channel은 지원하지 않습니다.
특징
-
Product Specifications
Encoder Properties
Output Circuit Type Push-Pull (Single-Ended) Encoder Resolution 300 CPR
Electrical Properties
Supply Voltage Min 5 V DC Supply Voltage Max 5 V DC Output Frequency Max 30 kHz
Physical Properties
Shaft Diameter 4 mm Operating Humidity Min 30 %RH Operating Humidity Max (Non-condensing) 85 %RH Operating Temperature Min -10 °C Operating Temperature Max 85 °C IP Rating IP40 Weight 4 g -
Comes Packaged With
- 0.9 mm Hex Key for set-screws
- Plastic encoder cap and mount
- Encoder disk
- Encoder PCB
- Two screws
- 3035 - Cable for HKT22 Encoder
- The mounting holes on the HKT22 encoder line up with the holes on the back of any rear-shaft stepper motor sold at Phidgets, Inc. It can also attach to the following DC motors (please note that it must be this exact revision):
- 3269_2 - 24V/5.1Kg-cm/588RPM 4.25:1 DC Gear Motor
- 3270_1 - 24V/14.2Kg-cm/192RPM 13:1 DC Gear Motor
- 3271_1 - 24V/20.3Kg-cm/139RPM 18:1 DC Gear Motor
- 3272_1 - 24V/50.9Kg-cm/53RPM 47:1 DC Gear Motor
- 3273_1 - 24V/82.6Kg-cm/33RPM 76:1 DC Gear Motor
- 3274_1 - 24V/173.3Kg-cm/15RPM 168:1 DC Gear Motor
It connects to any of the following interface boards via the included cable: