할로우 샤프트 광학 인코더 IHC3808
(Hollow Shaft Optical Encoder IHC3808)
개요
- 본 제품은 8mm 지름의 샤프트를 가진 모터와 사용이 가능한 Hollow-shaft encoder입니다.
- index channel은 모터가 시작할때의 방향을 찾기 쉽게 하여 줍니다.
- 광학 quadrature encoder로 샤프트 커플러 없이 모터의 8mm 리어 샤프트에 부착하여 사용이 가능합니다.
- 회전당 360 카운트를 가지고 있으며, 모터 샤프트에 설치 후 설정 스크류를 이용하여 고정할 수 있습니다.
- index channel을 사용하여 매 한바퀴를 돌때마다 하나의 펄스를 보내줍니다.
특징
-
Product Specifications
Encoder Properties
Output Circuit Type Push-Pull (Single-Ended) Encoder Resolution 360 CPR Encoder Speed Max 4500 RPM
Electrical Properties
Supply Voltage Min 5 V DC Supply Voltage Max 5 V DC Output Frequency Max 100 kHz
Physical Properties
Shaft Diameter (Inner) 8 mm Shaft Maximum Axial Load 10 N Shaft Maximum Radial Load 20 N Operating Humidity Min 30 %RH Operating Humidity Max (Non-condensing) 85 %RH Operating Temperature Min -10 °C Operating Temperature Max 70 °C IP Rating IP54 Weight 121 g -
Connection
This rotary encoder connects to:
The easiest way to connect your encoder to the 1057 or to the 1047 is to use a 3019 - HighSpeed Encoder Cable 50cm, cut it to the desired length and solder the encoder wires to the encoder cable as follows:
Function 3532 - Encoder 3019 - Phidget cable +5V Red Red Ground Black Black Data (A) Green White Data (B) White Brown Index (Z) Yellow Green
You could also buy the male connector, which is a Molex 50-57-9405, and crimp it onto the end of the cable, if you have the appropriate tools. -
Comes Packaged With
- Mounting screws and washers