Adafruit Ultimate GPS Breakout
- 66 channel w/10 Hz updates
(Ultimate GPS 모듈)
개요
- 본 제품은 외부 안테나를 지원하고 있으며, pulse per second 출력을 지원합니다.
- 개요:
- -165 dBm sensitivity, 10 Hz updates, 66 channels
- 5V friendly design and only 20mA current draw
- Breadboard friendly + two mounting holes
- RTC battery-compatible
- Built-in datalogging
- PPS output on fix
- >25Km altitude
- Internal patch antenna + u.FL connector for external active antenna
- Fix status LED
- 본 모듈은 MTK3339 칩셋을 채택하여 66개의 채널상에서 22개의 위성을 트랙할 수 있으며,
- 훌륭한 수신 감도(-165dB)를 가지고 있으며 내장 안테나를 가지고 있습니다.
- 고속 고감도 데이터 로깅을 위해 초당 10개의 location update이가 가능합니다.
- 전력소모는 매우 낮아서 네비게이션중에 20mA를 소비합니다.
- 3.3V 레귤레이터가 있어 3.3-5VDC로 전원을 공급할 수 있으며, ENABLE 핀이 있어 마이크로컨트롤러의 핀을 이용하여 모듈을 켜거나 끌 수 있습니다.
- RTC 전원공급용 CR1220 코인셀 배터리 공간이 있습니다.
- 위성을 찾을때 LED는 1Hz 주기로 깜빡이며, fix가 발견되면 전원을 절약하기 위해 매 15초마다 깜빡입니다.
- LED를 항상 켜두고 싶은 분을 위해 FIX 시그널 출력핀이 있어 추가적인 LED를 연결할 수 있습니다.
- 본 MTK3339 버전3 모듈은 외부 안테나를 사용할 수 있으며, built-in 데이터 로깅이 가능합니다.
- 모듈에는 -165dB의 감소를 자랑하는 세라픽 패치 안테나를 장착하고 있습니다만 좀더 큰 안테나가 필요하다면,
- 3V active GPS 안테나를 uFL 커넥터를 통해 연결할 수 있습니다.
- 모듈은 액티브 안테나를 자동으로 감지하고 안테나를 변경합니다.
- 본 제품안에는 마이크로컨트롤러가 장착되어 있어 마이크로컨트롤러 내부의 비어 있는 플래쉬 메모리에 데이터 로그를 저장할 수 있습니다.
- 마이크로컨트롤러가 "Start Logging" 명령을 보냄으로써 로그가 시작이 되는데, 이 명령을 보내고 잠자고 있는 마이크로컨트롤러에 매 15초마다 fix가 있을 경우 로그 데이터를 저장합니다. 마이크로컨트롤러의 내부 플래쉬에는 16시간 데이터를 저장 할 수 있습니다.
- 플래쉬에 로깅되는 데이터와 시간 주기는 바꿀수 없습니다.
- 본 모듈은 약 27Km 고도상에서까지 동작이 가능합니다.
- 조립되고 테스트된 모듈과, 헤더, CR1220 코인셀 홀더가 제품에 포함되어 있으며, 배터리는 포함되어 있지 않습니다.
- 라이브러리는 다음 링크를 참고하십시오.
- library for GPS usage, with background parsing and can set and query the built in GPS logging capability (called LOCUS).
- 튜토리얼은 다음 링크를 참고하십시오. tutorial
특징
- Satellites: 22 tracking, 66 searching
- Patch Antenna Size: 15mm x 15mm x 4mm
- Update rate: 1 to 10 Hz
- Position Accuracy: 1.8 meters
- Velocity Accuracy: 0.1 meters/s
- Warm/cold start: 34 seconds
- Acquisition sensitivity: -145 dBm
- Tracking sensitivity: -165 dBm
- Maximum Altitude for PA6H: tested at 27,000 Meters
- Maximum Velocity: 515m/s
- Vin range: 3.0-5.5VDC
- MTK3339 Operating current: 25mA tracking, 20 mA current draw during navigation
- Output: NMEA 0183, 9600 baud default
- DGPS/WAAS/EGNOS supported
- FCC E911 compliance and AGPS support (Offline mode : EPO valid up to 14 days )
- Up to 210 PRN channels
- Jammer detection and reduction
- Multi-path detection and compensation
- Firmware version 5153
- Breakout board details:
- Weight (not including coin cell or holder): 8.5g
- Dimensions (not including coin cell or holder): 25.5mm x 35mm x 6.5mm / 1.0" x 1.35" x 0.25"
튜토리얼
- We have a nice fancy library for GPS usage, with background parsing and can set and query the built in GPS logging capability (called LOCUS). A full tutorial is also available, which has tons of information about the module, how to use the data logger and more
Tutorials on the Adafruit Learning System featuring this product: Adafruit Ultimate GPS on the Raspberry Pi
Adding GPS tracking to your Pi-based projectsReverse Geocache Box
For proposals, or for fun!Adafruit Ultimate GPS
One GPS to rule them all and in the darkness find them!GPS Dog Collar
Track how far you've walked your dog!
다운로드
- MTK3329/MTK3339 command set sheet for changing the fix data rate, baud rate, sentence outputs, etc!
- Datasheet for the PA6B (MTK3329) GPS module itself - used in version 1 of this module
- Datasheet for the PA6C (MTK3339) GPS module itself - used in version 2 of this module
- Datasheet for the PA6H (MTK3339) GPS module itself - used in version 3 of this module
- MT3339 GPS PC Tool (windows only) and the PC Tool manual
- Mini GPS tool (windows only)