크로마탭 -WS2812B LED 스트립 부착용 아두이노
(ChromaTab)
개요
- 크로마탭은 작은 아두이노 호환 보드로 WS2812B LED 스트립에 직접 납땜하여 사용할 수 있는 제품입니다.
- Atmega328p 마이크로컨트롤러를 사용하여 아두이노 프로 미니 기반으로 디자인되어 아두이노 IDE와 호환됩니다.
- 스케치 코드는 USB-Serial 컨버터 모듈 등을 이용하여 업로드가 가능합니다.
- 펌웨어는 adafruit neopixel 라이브러리를 기반으로 되어 있어 쉽게 애니메이션이나 효과를 만들 수 있습니다.
- 약 10mm 너비로 LED 스트립과 잘 들어 맞는 너비입니다.
- 제품의 사이즈를 작게 하기 위해 핀은 1.27mm 피치이며, 같이 사용할 수 있는 핀헤더가 포함되어 있습니다.
특징
-
Features
- Tiny form factor just 10mm x 43mm
- ATMEGA328p microcontroller
- 3 Castellated pads for soldering directly onto WS2812B strips
- 2 Buttons
- All Arduino Uno/Mini pins broken out
- 5v on board regulator, can be run at down to 5v due to very low drop out.
Specification
- Microcontroller: Atmel ATmega328P in MLF-28pin package
- Input Voltage: 5V to 7V
- Operating Current: Approx 90mA average during normal operation Max. 300mA
- Current per I/O pin: 40mA
- Clock speed: Microcontroller 16MHz
- SRAM: 2 KB
- EEPROM: 1 KB
- Flash Memory: 32 KB
- Digital I/O pins: 14 ( of which 6 are PWM )
- Analog Input pins: 6
Part List
- 1 x ChromaTab V1 board
- 2 x 10 way 1.27mm pitch male pin headers
- 1 x 6 way 1.27mm pitch male pin headers
- 1 x 5 way 1.27mm pitch male pin headers