Mach3 5축 CNC 인터페이스 보드
(5 Axis CNC Interface Board for Mach3)
개요
- 본 제품은 MACH3용 3축 CNC 인터페이스 보드입니다.
- 특별히 CNC 1축 2 Phase 스텝 모터 드라이버 컨트롤러를 위해 디자인된 제품입니다.
- 보드상에는 고성능 74HC244 및 Schmitt inverter 74HC14를 탑재하고 있으며,
- 입력 신호는 증폭되고, 정류되고, 필터되어 출력신호를 안정적이고 강력하게 만들어 줍니다.
- 본 5축 인터페이스 보드를 이용하여 1-5 마이크로스텝 드라이버 컨트롤러를 PC에서 MACH3, EMC2, KCAM4, 등의 패러럴포트 제어 CNC 소프트웨어를 이용하여 제어할 수 있습니다.
- 케이블이 포함되어 있습니다.
특징
- High performance, cost-effective.
- Maximum support 5-axis stepper motor driver controllers.
- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals powered phase are separated to protect computer security.
- All the signals are opto-isolated which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Compatible with all the 2 phase microstep drivers in the market.
- Output 0-10V analog voltage for inverter to control the spindle speed.
- size: 7cm x 9cm x 1.7cm
-
Input VoltageUSB port from PC or 12-24V power supply(optional)Drive typePulse and Direction Signal ControlSuitable Microstep Driver2 Phase Microstep DriverNet weightApprox 75gDimensions90 * 70 * 20mm (L*W*H)
문서
- User Manual
- 패러럴포트 핀맵입니다(아래 그림은 컴퓨터쪽 연결 핀맵 이미지로 실제 보드상의 1번 핀이 그림상의 13번 핀이며, 보드상의 25번핀이 그림상의 14번 핀입니다)