13.56Mhz RFID 읽기/쓰기 모듈
(13.56MHZ RFID Reader/Writer Module V4)
개요
- 본 제품은 MFRC522 기반의 RFID 읽기/쓰기 모듈입니다.
- ISO14443A/Mifare 및 mifare classic을 지원하며 양방향으로 848kbit/s의 통신 속도를 지원합니다.
- 모듈에는 마이크로컨트롤러가 장착되어 있어 MCU의 펌웨어가 제공하는 API를 통해 읽기/쓰기 동작을 수행할 수 있습니다.
- 모든 명령은 UART를 통해 통신합니다.
- 모듈의 SPI 인터페이스는 MFRC 칩의 SPI 인터페이스로 이 인터페이스로 칩을 직접 접근 할 수 있습니다.
- 아래는 지원가능한 태그입니다.
-
Tags
Reading
Writing
Max Reading Distance
Note
MiFare 1 S50/S70
√
√
55mm
White PVC card
MiFare Ultralight
√
√
66mm
White PVC card
MiFare Ultralight C
√
√
28mm
White PVC card
MiFare DesFire EV1
√
×
38mm
White PVC card, only read tag ID
특징
- Support 7-byte UID reading.
- Support various Mafare cards
- Outstanding Reading/Writing distance
- Special Electronic Wallet Fountion
- Control by Serial UART interface: Baud rate could be 2400bps ~ 115200bps, with default baud rate 9600bps
- Configuration data is preserved in EEPROM against power cut off
- Built-in 8K EEPROM for data storage
- Easy to use, by sending simple commands users can control it to read or write cards
- In compact command, command is as short as one byte
- Power Supply: 4.5V~5.5V, typically 5V.
- Interface: UART (5V TTL) and SPI (3.3V TTL)
- Size: 40mm x 50mm
- Usage
Baud rate could be 2400bps ~ 115200bps
Default setting:
- Baud Rate: 9600bps
- Parity bit: None
- Start bit: 1
- Data bit: 8
- Stop bit: 1
There are two kinds of command: Basic command and compact command. All the command are in Hex format. Please download manual for more information.
Connecting with Arduino is pretty easy. With Arduino Sensor Shield, just plug in and play.
-
Dimention
- Shipping List
- RFID module V2 x1
- S50 key card x1
- S50 suqare white card x2
- 4-pin wire x1