EZO pH 측정 모듈 -UART, I2C
(EZO pH Circuit)
개요
- 본 제품은 작은 크기지만 강력한 성능을 가지고 있는 pH 측정 모듈입니다.
- 일반적인 어떤 pH 프로브, ph 센서, ph 일렉트로드와도 같이 사용이 가능한 제품으로 pH 프로브나 일렉트로드에서 pH 값을 읽어 들입니다.
- 0.001에서 14 pH값을 읽을 수 있으며, 높은 수준의 정교한 측정 오차를 가집니다.
- UART 및 I2C 인터페이스를 지원하며, 측정된 값은 ASCII 형태로 출력이 됩니다.
- 3.3V 및 5V 시스템에서 동작이 가능하며, 아두이노 및 라즈베리 파이 예제가 지원됩니다.
특징
- Reads
• Full range pH reading from .001 to 14.000
• Accurate pH readings down to the thousandths place (+/- 0.02)
• Temperature dependent or temperature independent readings
• Flexible calibration protocol supports single point, 2 point,
or 3 point calibration
• Calibration required only once per year with
Atlas Scientific pH probe
• Single reading or continuous reading modes
• Data format is ASCII
Two data protocols
• UART asynchronous serial connectivity
• (RX/TX voltage swing 0-VCC)
• I2C (default I2C address 0x63)
• Compatible with any microprocessor that supports UART,
or I2C protocol
• Operating voltage: 3.3V to 5V
• Works with any off-the-shelf pH probe
Sleep mode power consumption
• 0.995mA at 3.3V
Circuit Specs
• Dimensions: 13.97mm X 20.16mm (0.55" X0.79")
• Weight: 1.76 grams