FLiR 적외선 열상 이미지 센서 -Lepton 2.5
(FLIR Lepton 2.5 - Thermal Imaging Module)
개요
- 본 제품은 FLiR 적외선 열상 이미지 센서 -Lepton 2.5입니다.
- Lepton 2.5 longwave infrared (LWIR) 이미지 센서로, 80x60 픽셀 해당도를 지원하며 8-14 마이크론의 파장 범위의 적외선 방사 입력을 캡쳐하여, 열상 이미지로 출력합니다.
- Lepton 2.5는 +/- 5도의 정확도로 카메라 온도와 상관없이 프레임내에 모든 4800 픽셀에 대해 보정된 온도값을 출력합니다.
- 알림: 코로나 바이러스로 인해 현재 공급물량이 제한적이며, 일주일에 한개만 공급이 가능한 상황입니다. 주문순서에 따라 출고가 되고 있사오니 다소 납기가 소요될수 있는점 양해부탁 드립니다.
특징
- Effective Frame Rate: 8.6 Hz (commercial application exportable)
- Input Clock: 25-MHz nominal, CMOS IO Voltage Levels
- Output Format: User-selectable 14-bit, 8-bit (AGC applied), or 24-bit RGB (AGC and colorization applied)
- Pixel Size: 17 µm
- Radiometric Accuracy: High gain: Greater of +/- 5°C or 5% (typical) Low gain: Greater of +/- 10°C or 10% (typical)
- Scene Dynamic Range: -10-140 °C (high gain); up to 450°C (low gain) typical
- Spectral Range: Longwave infrared, 8 µm to 14 µm
- Temperature Compensation: Automatic. Output image independent of camera temperature.
- Thermal Sensitivity: <50 mK (0.050° C)
- Video Data Interface: Video over SPI
- Control Port: CCI (I2C-like), CMOS IO Voltage Levels
- Package Dimensions - Socket Version (w x l x h): 11.8 x 12.7 x 7.2 mm
- Mechanical Interface: 32–pin socket interface to standard Molex® socket
- Non-Operating Temperature Range: -40 °C to +80 °C
- Optimum Temperature Range: -10°C to +80°C
- Shock: 1500 G @ 0.4 ms
- Array format: 80 × 60, progressive scan
- FOV - Diagonal: 63.5°
- FOV - Horizontal: 50° (nominal)
- Image Optimization: Factory configured and fully automated
- Non-Uniformity Correction (NUC): Automatic with shutter
- Sensor Technology: Uncooled VOx microbolometer
- Solar protection: Integral
- Input Supply Voltage: 2.8 V, 1.2 V, 2.5 V to 3.1 V IO
- Power Dissipation: 150 mW (operating), 650 mW (during shutter event), 4 mW (standby)