FPF1320 파워멀티플렉서 -microB USB 커넥터
(FPF1320 Power Multiplexer Carrier
with USB Micro-B Connector)
개요
- 본 제품은 Fairchild사의 FPF1320을 탑재한 파워 멀티플렉서입니다.
- 부하에 연결되어 있는 두개의 전력 소스중 하나를 선택할 수 있게 하여주면서 양 전력 소스로 역전류가 흐르는 것을 방지하여 줍니다.
- 보드상에는 microB USB 커넥터가 장착되어 있으며, 파워 입력중 하나로 사용할 수 있습니다.
- FPF1320은 듀얼 입력 싱글 출력의 파워 스위치로 mux와 같이 동작합니다.
- digital select signal을 이용하여 두개의 입력(1.5에서 5.5V, 최대 1.5A)중 하나를 선택할 수 있습니다.
- 각각의 입력 체널은 내부 MOSFET 스위치에 의해 제어되어 전압강하를 막아줍니다.
특징
Minimum operating voltage: 1.5 V Maximum operating voltage: 5.5 V Maximum output current: 1.5 A -
Pin Description VINA Power supply input A. Can be connected to a 1.5 V to 5.5 V power source. VINB Power supply input B. Can be connected to a 1.5 V to 5.5 V power source. Connected to VBUS by default through surface-mount jumper. This power rail is preferred by default. VBUS USB 5 V supply. Connected to VINB by default through surface-mount jumper. VOUT Multiplexed power output. GND Common ground for power supplies, load, and USB. (All of the board's GND pins are internally connected with each other and with GND from the USB connector.) SEL Select input that determines which power source is selected: LOW (< 0.65 V) selects VINA, HIGH (> 1.15 V) selects VINB. On-board pull-up resistor to VINB gives it the default behavior of selecting VINB when VINB is connected and selecting VINA when it is not. EN Enable input; when driven low, disconnects VOUT from both VINA and VINB. Pulled high through a pull-up resistor and diodes to both VINA and VINB so the IC is enabled by default whenever either power supply is present. D−
D+
IDSignals broken out from USB connector.