MAX30102 심박 측정 센서 -유리커버
(MAX30102 Heart Rate Sensor)
개요
- 본 제품은 MAX30102 심박센서입니다.
- pulse oximeter와 심박 모니터링 바이오 센서로, 빨강 LED, 적외선 LED, 포토 검출기 등의 회로를 장착하고 있습니다.
- 손가락, 귀, 손목 등에서 심박 및 혈액 산소 포화도를 측정하기 위해 사용되며 I2C 인터페이스를 가지고 있습니다.
- 기존의 MAX30100 칩에 비해 유리 커버를 가지고 있어 외부 및 내부 빛에 의한 간섭을 제거하여 신뢰할 만한 성능을 가지고 있습니다.
특징
- LED peak wavelength: 660nm/880nm
LED power supply voltage: 3.3~5V
Detection signal type: light reflection signal (PPG)
Output signal interface : I2C interface
Communication interface voltage: 1.8~3.3V~5V (optional)
Board reserved assembly hole size: 0.5 x 8.5mm - Pin
- VIN: main power input terminal 1.8-5V
3-bit pad: Select the pull-up level of the bus, depending on the pin master voltage, select 1.8v or 3_3v (this terminal contains 3.3V and above)
SCL: the clock connected to the I2C bus;
SDA: data connected to the I2C bus;
INT : Interrupt pin of the MAX30102 chip;
RD: RED LED ground terminal of MAX30102 chip, generally not connected;
IRD: The IR LED ground of the MAX30102 chip is generally not connected;
GND: Ground wire.
- VIN: main power input terminal 1.8-5V