뉴클레오-144 STM32F303ZET6 개발보드 -mbed
(Nucleo-144 development board with STM32F303ZET6 MCU)
개요
- 본 STM32 Nucleo-144 개발보드는 STM32 마이크로컨트롤러를 이용하여 쉽게 프로토타이핑을 할 수 있게 하여 주는 개발보드입니다.
- 아두이노 우노의 확장형 핀헤더를 가지고 있어 기존의 여러 쉴드를 쉽게 이용할 수 있게 하여 줍니다.
- 또한 보드상에 ST-Link/V2-1 디버거/프로그래머가 내장되어 있습니다.
- STM32의 HAL 라이브러리를 이용할 수 있으며, ARM mbed 를 이용하여 개발을 진행할 수 있습니다.
특징
- STM32 microcontroller in LQFP144 package
- Two types of extension resources:
- ST Zio connector including: support for Arduino™Uno Revision 3 connectivity (A0 to A5, D0 to D15) and additional signals exposing a wide range of peripherals (A6 to A8, D16 to D72)
- ST morpho extension pin header footprints for full access to all STM32 I/Os
- ARM®mbed™ -enabled (see http://mbed.org), planned for the second quarter of 2016
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector:
- Selection-mode switch to use the kit as a standalone ST-LINK/V2-1
- USB re-enumeration capability. Three different interfaces supported on USB: virtual com port, mass storage, debug port
- Flexible board power supply:
- 5V from ST-LINK/V2-1 USB VBUS
- External power sources: 3.3 V and 7 - 12 V on ST Zio or ST morpho connectors, 5 V on ST morpho connector
- USB OTG or device full speed with Micro-AB connector (depending on STM32 support)
- IEEE-802.3-2002 compliant Ethernet connector (depending on STM32 support)
- Three user LEDs
- Two push buttons: USER and RESET
- LSE crystal:
- 32.768KHz crystal oscillator
- Comprehensive free software HAL library including a variety of software examples
- Supported by wide choice of Integrated Development Environments (IDEs) including IAR™, Keil®, GCC-based IDEs, ARM®mbed
문서
- DB2762: STM32 Nucleo-144 board
- UM1727: Getting started with STM32 Nucleo board software development tools
- UM1974: STM32 Nucleo-144 board
- arm mbed