디지털 연동 펌프 -PWM 신호 제어
(Gravity: Digital Peristaltic Pump)
개요
- 본 제품은 디지털 연동 펌프입니다.
- 수질 시스템이나 액체를 관리하는 시스템에서의 액추에이터로 사용되는 부품으로 펌프에 PPM 모터 드라이버를 장착하고 있는 제품입니다.
- 제어 신호는 표준 서보모터와 호환되어 아두이노나 라즈베리파이 및 다른 마이크로컨트롤러를 이용하여 방향과 흐름 속도를 제어할 수 있습니다.
- 펌프의 튜브는 BPT 재질로 만들어져서 항산 기능이 있으며, 긴 수명을 가집니다.
- 소량의 액체를 움직여서 전달하고자 할경우에 적합한 제품으로 액체 흐름을 쉽고 정교하게 제어할 수 있습니다.
- 알림: 모터는 약 5W정도를 소비하기 때문에 외장 전원 연결을 추천하여 드립니다.
-
(Excerpt from internet)
특징
-
Peristaltic pump
- Low noise,
- Low cost,
- Simple structure,
- Easy to maintain,
- Three rotors with moderate pulsation,
- Non-toxic and pollution-free
Driver board
- Gravity 3Pin digital connector, plug and play
- Servo PPM control signal, driving easily and compatible with Arduino, Raspberry Pi, micro: bit and other controllers.
-
Driver Board
- Input Voltage: 5V-6V
- Maximum Continuous Operating Current: 1.8A
- Peak Current: 2.5A
- Quiescent Current: <1mA (No PPM Signal Input)
- PPM Signal Resolution: 1us
- Positive Pulse Width of the PPM Signal: 500us-2500us
- Forward Pulse Width Range: 500us-1400us (500us: max forward speed)
- Stop Pulse Width Range: 1400us-1600us
- Inverted Pulse Width Range: 1600us-2500us (2500us: max inverted speed)
- PPM Frequency: 50Hz (Servo Control Signal)
- Connector: Gravity PH2.0-3P
- Size: 27.4 x 28.7 mm/1.08 x 1.13 inches
Peristaltic Pump
- Motor: DC Motor
- Rated Voltage: 6V
- Rated Power: 5W
- Tube Material: BPT
- Tube Specifications: inner diameter 2.5mm, outer diameter 4.5mm
- Pump Head Material: Engineering Plastics
- Pulsation: Three Rollers, Small Pulsation
- Flow: ≥45ml/min (almost 1ml/s)
- Working Conditions: ambient temperature 0 ~ 40 ℃, relative humidity <80%
-
SHIPPING LIST
- Gravity: digital peristaltic pump with PPM motor driver x1
- Digital sensor cable x1
- Silicone tube (1m) x1
- 10mL plastic measuring cylinder x1