라즈베리 파이 카메라 모듈 -M12x05 렌즈 마운트
(Raspberry Pi Camera Module with M12x0.5 Lens Mount)
개요
- 본 제품은 라즈베리 파이 5M 픽셀 카메라 모듈로 M12x05 렌즈 마운트를 장착한 제품입니다.
- 공식 라즈베리 파이 카메라와 호환되는 카메라로 광학 성능에 최적화된 제품입니다.
- 좀더 깨끗하고 날카로운 이미지를 제공하며 FREX, STROBE 시그널을 지원하여 적절한 펌웨어를 사용한다면 multi-camera synchronize capture에 사용할 수 있습니다.
- CSI 포트를 통해 라즈베리 파이와 연결이 가능하여 라즈베리파이의 BCM28xx 프로세서에 보다 높은 대역폭의 데이터 전송이 가능합니다.
- 36mm x 36mm 크기의 작은 크기로 여러 어플리케이션에 사용이 가능합니다.
- 5메가 픽셀로, fixed focus lens를 가지고 있습니다.
- 정지 이미지는 2592 x 1944 픽셀 이미지를, 1080p30, 720p60, 640x480p60/90 비디오를 지원합니다.
특징
- High-Definition video camera for Raspberry Pi Model A/B/B+ and Raspberry Pi 2
- Omnivision OV5647 sensor in a fixed-focus module with replaceable Lens
- Lens holder: M12x0.5 , CS mount or C mount
- 5MPixel sensor
- Integral IR filter
- Still picture resolution: 2592 x 1944
- Max video resolution: 1080p
- Max frame rate: 30fps
- Support FREX/ STROBE feature
- Size: 36 x 36 mm
- 15 cm flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector
-
Table 1 P1 Connector Pin Definition
Pin No. PIN NAME TYPE DESCRIPTION 1 DGND Ground Power ground 2 CAM_D0_N Output MIPI data lane0 negative output 3 CAM_D0_P Output MIPI data lane0 positive output 4 DGND Ground Power ground 5 CAM_D1_N Output MIPI data lane1 negative output 6 CAM_D1_P Output MIPI data lane1 positive output 7 DGND Ground Power ground 8 CAM_C_N Output MIPI clock negative output 9 CAM_C_P Output MIPI clock positive output 10 DGND Ground Power ground 11 POWER_EN Input Camera module power enable active high 12 LED_EN Input Reserved 13 SCL Input Two-Wire Serial Interface Clock 14 SDA Bi-directional Two-Wire Serial Interface Data I/O 15 +3.3V POWER 3.3v Power supply Table 2 P2 Connector Pin Definition
Pin No. PIN NAME TYPE DESCRIPTION 1 +3.3V POWER 3.3v Power supply 2 DGND Ground Power ground 3 STROBE Output Strobe output 4 FREX input Frame exposure control -
Lens Options
-
The Camera Lens for Raspberry Pi Camera Board is HX-27227
- The HX-27227 Lens Specification :
-
문서
연관제품
- 연관제품 1