마그네틱 버저 트랜스듀서 모듈
(BUZZ 2 click)
개요
- 본 제품은 CMT-8540S-SM 마드네틱 버저 트랜스듀서 모듈입니다.
- PWM 핀으로 제어가 되며, 3.3V나 5V로 동작합니다.
특징
-
How the click works
The CMT-8540S-SMT magnetic buzzer is controlled by the PWM pin on the mikroBUS™ line.
You can create different sound patterns using the Sound library supported in our compilers, or utilize the microcontroller internal PWM module to create the signal for the buzzer. Signal frequency determines the sound pitch, and the duty cycle determines the amplitude (sound volume).
Power supply selection
Onboard VCCIO SEL zero-ohm resistor (SMD jumper) is used to determine whether 5V or 3.3V power supply is used. This resistor is placed in 5V position by default.
Specifications
Type Magnetic Applications The click is ideal for adding audio signalization feature to your prototype device On-board modules CMT-8540S-SMT magnetic buzzer transducer Key Features 4kHz resonant frequency Interface PWM Input Voltage 3.3V or 5V Click board size M (42.9 x 25.4 mm) Pinout diagram
This table shows how the pinout on BUZZ 2 click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
문서
연관제품
- 연관제품 1