아날로그 신호 절연 모듈
(Gravity: Analog Signal Isolator)
개요
- 본 제품은 아날로그 시그널 절연 모듈입니다.
- 센서에 절연된 전원을 공급하고 아날로그 신호를 절연하고자 디자인된 제품입니다.
- 민감한 아날로그 센서는 측정시에 다른 센서에 간섭을 받아 측정값이 변화할 수 있는데 그러한 간섭을 방지하여 줍니다.
- 주로 ph sensor, electrical conductivity sensor등을 같이 사용하고자 할 경우에 많이 사용합니다.
- 알림: 모듈이 자체적으로 전원을 많이 소비하므로 외부전원을 이용하여 충분한 전류를 공급하여 주어야 할 수 있습니다.
-
특징
- Operating Voltage: 5.0V
- Response Time: 4 seconds (Typ)
- Analog Error (both ends): <± 20mV (Typ)
- Interface Type: PH2.0-3P
- No load Current: 75mA
- Dimension: 42 * 32mm / 1.65 * 1.26 inch
- Non-isolated Terminal (Arduino Side)
Supply Voltage: 5.0 ± 0.1V
Analog Output: 0 ~ 5.0V - Isolated Terminal (Sensor Side)
Output Voltage: 5.0 ± 0.2V
Analog Input: 0 ~ 5.0V SHIPPING LIST
- Gravity: Analog Signal Isolator x1
- PH2.0-3P Cable x2
문서
- Schematic
Layout
Datasheet - Caution:
1.MCU should provide 5.0±0.1V power supply and it decides the finial output precision.
2.The module will consume a large current when it is working, you'd better to use an external power supply.
3.The MAX output current of SEN terminal is 170mA.
4.The GNDs of SEN and MCU are isolated, please DO NOT connect them together.
5.It will be a little warm when it is working
연관제품
- 연관제품 1