SSR-40DA 솔리드 스테이트 릴레이 40A
(SSR-40DA Single Phase
DC to AC Solid State Relay 40A)
개요
- 본 제품은 Single-Phase Solid State Relay입니다.
- 40A등급이며, 낮은 동작전류 가지고 있으며, 내장된 opto-couple으로 절연되어 있어 아두이노로 추가 회로없이 바로 동작시킬 수 있습니다.
- 불연성의 외부의 플라스틱 커버는 릴레이를 안전하게 보호하며, 충격이나 진동에 강하게 디자인되었습니다.
- 스크류 터미널 블럭을 통해 전선을 연결할 수 있으며, 낮은 입력 동작전류로 인해 쉽게 다양한 디지털 회로와 연결할 수 있습니다.
- SSR 릴레이는 비접촉식이기때문에 기존의 기계식 릴레이에 비해 수명과 성능(낮은 전자기파의 영향, 빠른 속도 등)좋습니다.
- 알림: 중국에서 수입되는 카피품입니다.
특징
- Reliable SMT technology
- High ultra insulation resistance over 50MΩ/500V DC
- High dielectric over 2.5KV
- Low enable current less than 7.5mA/12V DC, compatible with CMOS IC or TTL
- Low EMI/EFI & surge by zero cross trigger method
- High surge current over 410A/one cycle (60Hz)
- High surge voltage duration by snubber circuit
- Control Mode:DC-AC
- Load Voltage: 24-380VAC
- Control Voltage: 3-32VDC
- Control Current: DC3-25mA
- Working voltage: 250V
- On voltage: ≤1V
- One-off Time: ≤10ms
- Off leakage Current: ≤2mA
- Installation Method: Bolt Fixed
- Working Indication: LED
문서
- playing-with-raspberry-pi
- Using the Raspberry Pi to control AC electric power
- wiring example
-
참고 예제12345678910111213141516171819/*The ssr will turn on for 5s and then turn off for 5s, and so on.*/int ssrControlPin = 13;void setup() {// initialize the digital pin as an output.pinMode(ssrControlPin, OUTPUT);}void loop() {digitalWrite(ssrControlPin, HIGH); // set the SSR ondelay(5000); // wait for 5 seconddigitalWrite(ssrControlPin, LOW); // set the SSR offdelay(5000); // wait for 5 second}
연관제품
- 연관제품 1