2.8 인치 TFT 터치 쉴드 -정전식
(2.8" TFT Touch Shield for Arduino w/Capacitive Touch)
개요
- 본 제품은 2.8인치의 정전식 터치 스크린을 가진 TFT 디스플레이 쉴드입니다.
- 4개의 흰색 LED 백라이트를 가지고 있으며 18비트(262,000 색상)를 표현할 수 있으며, 240x320 픽셀을 갖고 있습니다.
- 정전식 터치 스크린을 가지고 있어 손가락이 접촉되는 곳을 검출할 수 있습니다.
- SPI를 통해 디스플레이와 SD카드와 통신할 수 있기 때문에 아두이노 우노/메가/레오나르도와 사용하기 용이합니다.
- 정전식 터치 컨트롤러는 I2C를 이용하여 통신합니다.
- 제품을 아두이노에 꼽고 라이브러리를 로드하면 바로 동작이 가능합니다.
- 본 디스플레이 쉴드는 램 버퍼링을 내장한 컨트롤러를 가지고 있어 마이크로컨트롤러에서 거의 할일이 없습니다.
-
특징
- 2.8" diagonal color touchscreen TFT
- 240x320 resolution, 18-bit (262,000) color - our library uses 16 bit color mode
- ILI9341 (datasheet) controller with built in video RAM buffer
- FT2606 touch screen controller
- High speed SPI display with digital I2C touchscreen driver
- The display uses digital pins 13-9. Touchscreen controller requires I2C pins SDA and SCL. microSD pin requires digital #4. That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available if not using the microSD
- Works with any classic Arduino '328. Solder closed three jumpers to use the ICSP header for use with Leonardo or Mega
- Onboard 3.3V @ 300mA LDO regulator, current draw depends on usage but is about 100mA for the display and touchscreen
- 4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control
- Single-touch capacitive touch bonded on top
문서
- 2.8" diagonal color touchscreen TFT
- ILI9341 (datasheet)
- FT2606 touch screen controller
- full open source graphics library that can draw pixels, lines, rectangles, circles and text. We also have a touch screen library that detects x, y and z (pressure) and example code to demonstrate all of it. The code is written for Arduino but can be easily ported to your favorite microcontroller!